USB direct to ALDL Bidirectional Cable.

No need for any extra connections. No need for problematic USB to serial adapters. This cable goes from USB directly to the ALDL connector.

This cable supports only the bidirectional 8192 baud ALDL data on pin M.

It does not support the 160 baud unidirection ALDL data on pin E.

That means it supports the 7730, 7727, 3800 Series I, and 4.9 ECMs. It does not support the stock Fiero ECM however.









Shipping to US addresses $5.20
Shipping to Canada $11.95

Order at
http://reddevilriver.com/aldl.html

[This message has been edited by phonedawgz (edited 12-18-2011).]

I will be first to order it

Too late to be the first.

whens the USB to OBD2 with flash ability's coming? :X

That would be nice

I'll start working on it.

quote Originally posted by hookdonspeed: whens the USB to OBD2 with flash ability's coming? :X

quote Originally posted by phonedawgz: That would be nice I'll start working on it.

:P i gota dhp, i could always crack it open and see whats in it :P

It would be quite interesting to see.

Hi Tim, got the switches the other week thank you on a good quality part.

will you be doing a cable for a stock v6 ecm?

jon

I might in the future, but no plans right now.

Bump - more are now in stock.

[This message has been edited by phonedawgz (edited 02-15-2012).]

I have the stock ECM one if you're interested --

This cable has been replaced by

https://www.fiero.nl/forum/Forum4/HTML/061099.html

You can purchase the cables directly from my website at http://reddevilriver.com/aldl.html

[This message has been edited by phonedawgz (edited 06-29-2012).]