So I am slowly cleaning out all of my Fiero stuff as I have no need for it anymore. I had some time tonight to do some organizing and I have a bunch of various stuff that I'm looking to sell.
Most prices are listed with shipping. Note that is for shipping in the lower 48. Anywhere else, I am going to have to get a quote.
#3- 1988 Fiero Automatic Trans ECM. $25 SHIPPEDSOLD
#4- 1988 Fiero Service manual. $45 SHIPPEDSOLD
#5- Fiero GT Wolf Indoor Car-cover. $50 ShippedSOLD
#6 MSD 6A ignition.SOLD
#7 Glow-shift 30PSI Boost guage.SOLD
#10 Ausfiero Door Speaker Pods with Kenwood Exceleon 6.5" Dual-mag component speakers.SOLD
#14- A lot of '88 brake parts! Instead of throwing this stuff out, I put it all into a flat-rate box and decided to give someone a shot at it all. I *think* the pads are Porterfield R4-S pads, but I'm not 100% certain. At worst, there are probably 3 good cores here.SOLD
#17- Master Power T61 Turbo. This is the turbo I had on my 3800. I managed to trap a best of 121.50MPH on it. The good things about it are: It has a powdercoated compressor housing and a silver ceramic coating on the turbine housing. It NEEDS to be REBUILT! I sent it out to be rebuilt and it turns out Master Power uses proprietary bearings and seals and you have to send it to one of their certified rebuilders. The turbo right now has no bearings and seals on it right now. I believe www.theboostlab.com handles Master Power turbo rebuilds.SOLD
#11- Passenger Side 'TIAC' GT taillight lense. It's in used condition but no cracks and very little delamination. The worst is around the trunk-keyhole area. SOLD
#15- Stock 'Performance Sound' Subwoofer housing. It comes with the stock subwoofer but I don't know how it sounds.SOLD
#18- L67 engine harness and computer. I'm not exactly sure which cars each of these are from, but if you are doing a 3800-supercharged swap, I would think that these would be useable. SOLD
#13- 4 12" C4 Corvette Brake Rotors. These are already drilled for the 5x100 bolt pattern. I had them on my Fiero for about 15k miles and switched them out for some 2-piece rotors. They have some corrosion on them that I mostly sanded off. To me, they are still in useable condition. I *believe* West Coast Fiero did the cross-drilling on them.SOLD
#19- 1988 Beechwood GT seats. These seats are in pretty good shape with no rips or tears. The driver's side plastic cover is there, but it has been epoxied back together and I don't know how long it'll last.SOLD
#8 Kenwood KAC-X201T 75wx2 amplifier. Was in working condition when I took it out of my car. I had it tested at a car audio shop on 1/20 and everything checked out ok. I ran it bridged to a Pioneer Premier 10" Sub. Specs SOLD
#9 8" Polk MOMO Subwoofer. It's essentially new as I have never ran power to it. I have test-installed it in a housing and that was it. SpecsSOLD
#12- Footwell Subwoofer housing w/ Pioneer Premier 10" Subwoofer. This was made by WhiteDevil88 back when he was still Stimpy. The Pioneer subwoofer has some of the paint flaking off of the speaker but besides that, it looks in good shape. I also has a crack in the back of the housing what would need to be repaired.SOLD
#16- 1988 V6 Engine mount and bracket. Has around 100k on it and doesn't appear to be very leaky, although there was a bit of moisture on one side. SOLD
I am in for the car cover if it is not ripped or torn anywhere. PM sent.
I PM'd you back, but I will let everyone know, the car-cover is for a GT without the wing. I don't know how well it would fit a on a GT with a wing. Johnyrottin has 1st dibs on it at the moment.
IP: Logged
10:35 AM
PFF
System Bot
AkursedX Member
Posts: 2890 From: Lackawanna NY Registered: Aug 2000
The MSD ignition is now sold. I have people interested in the car-cover and scoop.
quote
Originally posted by skuzzbomer:
The amp/sub combo is tempting me...
I don't know if it would make a difference, but I also have a 10" Pioneer Premier Subwoofer that I would sell for the same price as the MOMO sub. That sub is used, but in good shape. I can't find specs for it online right now, but I used the Kenwood amp that's up for sale to power it.
IP: Logged
04:53 PM
Dec 27th, 2011
fiero49 Member
Posts: 323 From: Pretonsburg ky Registered: Feb 2010
Is there anyone around you that has a GT with a wing that we can test fit it on? I really need a cover for Hulki's GT. Or can anyone tell me if the Wolf models that are made for GTs without wings will actually fit GTs with wings?
[This message has been edited by johnyrottin (edited 12-28-2011).]
IP: Logged
09:45 PM
Jan 10th, 2012
AkursedX Member
Posts: 2890 From: Lackawanna NY Registered: Aug 2000
The side scoop and boost gauge have been sold. I have someone interested in the amp and sub, but I want to test the amp and make sure it's in working order before I sell it.
Interested in the GT seats too, but you'd have to ship them. I really only need the skins, so LMK if you'd be willing to strip them down and mail them out.
I'd take the brake pads too.....if nobody else wants them.
[This message has been edited by mrfiero (edited 01-16-2012).]
IP: Logged
09:21 PM
Jan 17th, 2012
docholliday Member
Posts: 251 From: Avon, IN, USA Registered: Oct 2010
mrfiero, I just sent the PauPal funds to him for all the brake parts. I will contact you when they arrive and send you the pads for shipping charges only. I have new Raybestos pads.
-Joe
IP: Logged
08:37 PM
mrfiero Member
Posts: 9002 From: Colorful Colorado Registered: Mar 99
mrfiero, I just sent the PauPal funds to him for all the brake parts. I will contact you when they arrive and send you the pads for shipping charges only. I have new Raybestos pads.
-Joe
Cool! Thanks....my new Formula thanks you too.
IP: Logged
08:48 PM
Jan 18th, 2012
docholliday Member
Posts: 251 From: Avon, IN, USA Registered: Oct 2010
