Sorry, I had first put this car on as a 1987, but it is actually an '86. This is a very basic car, no sunroof, no power accesories, no tilt, the one option it has is cruise. I have removed all the body panels and every bolt from the front of the car to the rear window. I have almost everything apart except the engine bay and suspension. Both headlights were wroking properly 6 days ago when I removed the assemblies. Parts already spoken for include: 5 speed, dashpad, (not cluster and gauges), clutch master cylinder, and seats. I don't know what shipping will be on anything, but email me and let me know what you would like and an offer for it. I can send pics of the parts that I have if you want them.

Oooh, if you're removing the 5 spd anyway, there's a braket on the front of it that the front transmission mount attatches to... Is that going with the trans, or is that something I could get?

Maybe a MAP Sensor?

[This message has been edited by Twilight Fenrir (edited 08-23-2011).]

How much for this little section of fuel line that goes from the filter to the throttle body? Also need the bracket that holds the fuel filter.

Lower radiator mount?
how much for lt front fender?
and possibly lt taillight?

I will check on both parts when I get some more time. I won't be home the rest of today and it has been pouring rain anyway. I will search for these parts and let you know. How do I post pics by the way?

quote Originally posted by balejumper: How do I post pics by the way?

Bottom middle of the page you will see a red and blue box that says Pennocks image poster. Click on it and follow the instructions.

ECM still good? How mucho?

Here is a pic of the car when I started to disassemble it, the second pic is of the car as it sits right now, so most of the things that should be there are available if not spoken for yet, (I stupidly broke the windshield, sorry) I will try tomorrow to get prices and pics of what has already been asked about. I hope the pics post ok. It's the first time I am trying to post them

http://www.facebook.com/#!/...03707&type=1&theater

http://www.facebook.com/#!/...03707&type=1&theater

Facebook requires a membership to view.

Sorry, thought they would show up, I tried to load pics with the PIP, but can't seem to make it work for some reason, I'll ty to figure it out.

quote Originally posted by balejumper: Sorry, thought they would show up, I tried to load pics with the PIP, but can't seem to make it work for some reason, I'll ty to figure it out.

If you're using McAfee you'll have to go into your firewall and allow it access. For some reason McAfee doesn't like it. And pip has a maximum size that it will allow.

I took some pics of the parts that people are interested in. Maybe it is just easier to email me your email address and I can send them that way. My email is javelin41@hotmail.com I'll try to figure out the pic posting at a different time, I am a bit busy right now and my computer is getting slower. I think it's time for a reformat

Sent ya an email

Pay pal sent. Thanks

Got the parts. Thanks very much

Got parts this morning, thanks!

Good, hope everything works out well. If you need something else, let me know.

Is the passenger seat skin any good?


NM. Just re-read the OP and see the seats are spoken for. Free bump

[This message has been edited by 2farnorth (edited 09-04-2011).]

I have the fuel tank available if anyone wants to pick it up - $30

The complete head with rockers and pushrods for pickup only - $25

nice decklid with luggage rack (red) - $50

nice hood with headlight doors (red) - $50

Notchback section (minor 3/4" crack)(red) - $50

Complete Driver's door with crank window, grey panel, (red) - $75

I have many, many parts from this car left, I would rather someone use them instead of them wasting away somewhere in storage.

If someone is close and wants a bunch of stuff, let me know, we can work a deal on it, need to make room for the next project.

Not sure if anyone is interested, but the rear struts with knuckles, calipers, tierods, bearings for this car can be picked up for free. They are rusty, but the suspension didn't bounce or anything. The calipers would probably need to be rebuilt, they have been sitting around for a few years. Otherwise i will just scrap them out. I have the left rear A-arm available also.

Im looking for the drivers headlight bracket and everything attached to it, do you still have those parts?