This was mostly pulled from an 86 GT. Some of it was from or for an 88. Some of it is Corvette Parts. Everything is off of the car and stacked up on my back porch, ready to ship. All prices are negotiable.
If you need additional info or pictures of anything, just ask.
Click on the descriptions to go to the picture and details.
*** I will be at the Daytona show and can bring stuff there to save on your shipping costs. ***
T-Top Assembly .....................$500 Includes everything between the A-Pillar and the B-Pillar. The seals are still attached to the metal frame. It is missing one piece of plastic trim at the corner that's right over the driver seat head rest. The seals are decent but they are 26 years old. As far as I can tell they don't leak. The assembly is already mounted SECURELY to a wooden crate for shipping anywhere. The trim should all clean up pretty nice. The seals are still plyable, not too hard or smashed. There does appear to be some kind of sealant at the outer edges. The locks work (key included). The tint on the glass is wrinkled and will need redone. Some of you have already messaged me about this item. I will PM you and give you first crack at it.
IP: Logged
11:59 PM
Mar 24th, 2012
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Oil Pressure Gauge ........................$5 This is mounted into the factory trim plate that would normally hole power window and mirror switches on the center console. This was not installed on the car. I don't know what sender you would need.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
12:04 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Dot Matrix Parts ...........................$5-$15 I don't have any intact pieces that go around the shifter or the radio. Some are scratched up, some aren't. First come gets best pick.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
12:08 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Ash Trays ...................................$5/pair Some are better than others but they all should clean up fine. First come gets best pick. The black ones are sold. $5 total for the other 3.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
12:14 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
AC Vents ....................................$5 These vents are in perfect condition. They just snap into your existing trim. If your air deflectors are broken, these are for you. They go above the radio.
IP: Logged
12:15 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Fuel Door Opener .........................$15 Comes with cable and everything needed to replace a broken or non-latching fuel door. I'll even throw in the fuel door.
IP: Logged
12:19 AM
PFF
System Bot
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Antenna Base ..............................$10 The part where the antenna screws on is a bit rusty and worn. But an antenna will still screw onto it and stay there.
IP: Logged
12:22 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Rear Bumper ................................$100 Black paint is still in nice shape. No cracks. No tears. One of the mounting brackets for the license plate lights is damaged, as seen in the last picture. These areattached to the bumper with rivets.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
12:31 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Smooth Trim With Marker Lights ......$100 Painted black. Not perfect. Some of the marker lights were repaired where the bulbs plug into the back. All 14 pieces and 7 of the 8 attachement screws are included.
IP: Logged
12:34 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Front Air Dam With Brackets ...........$75 Slight warp in one side of the rubber piece. Brackets are not rusted. Comes with all brackets, left, right and center.
IP: Logged
12:37 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
I'll take the air dam (unless you want to sell the brackets seperately). LMK how much shipped to 27525, and what your PayPal address is...also interested in the 1/4 panel sheet metal that the battery tray is attached to.
[This message has been edited by hajii (edited 03-24-2012).]
IP: Logged
02:28 AM
FieroMaster88 Member
Posts: 7680 From: Mattawan, MI Registered: Nov 2000
Poly Cradle Bushings .....................$25 Fronts include the metal bushing that presses into the cradle. Autozone loans the ball joint press that removes yours and installs these. That's how I got them out.
IP: Logged
09:20 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Aero Body Moldings .......................$50 All of the aero moldings that attach to the fenders, doors and rear quarters. I DO NOT have the rocker panels.
Fenders ......................................$20 Left and Right GT fenders. Black paint is okay. No cracks or damage.
Door Skins ...................................$20 Left and Right. Black paint is okay. No cracks or damage.
Rear Quarter Panels .......................$20 Left and Right. Black paint is okay. Also have a silver one for the passenger side. No cracks or damage.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
09:22 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Gray Cloth Seat Covers ...........................$100 These came from an 88 with Lumbar support switch. There is a small hole in the bottom cushion of the driver's seat but it should be covered up by the seat back. If it's not completely hidden it will at least be partially hidden. I don't know because they came with my wife's car when we bought it in 2005. The previous owner had installed a set of Mr . Mike's seat covers.
If all you need is a driver's seat without the lumbar option, you can use the passenger seat on the driver's side.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
09:34 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Passenger Side Door Hinges ...............................$10 Appear to be in good shape. Price is for the pair on the passenger side. I used the driver's side hinges already.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
09:43 AM
2002z28ssconv Member
Posts: 1436 From: Orlando, FL Registered: Jun 2005
Sheet Metal Sections .....................$Offer This chassis has no rust. No trunk left. But battery area with sheetmetal is good. If you wrecked yours and need a section sawz-alled off of this one, make me an offer before I haul it to the recycler.
Tell me what you are looking for. I'll take some pictures and we can go from there.
I already have one person asking about the battery tray.
[This message has been edited by 2002z28ssconv (edited 03-24-2012).]
IP: Logged
09:53 AM
triads Member
Posts: 74 From: Orlando, Fl. USA Registered: Mar 2012
If you need closer detail let me know. I can always take more. ***
