Clearing out my garage yet again, all parts are from an 86 GT I parted out. Prices are obo and do not include shipping unless noted. Pictures are available upon request.
Body Panels: prefer local pickup for big items
GT rear clip $150 Rear GT clip inner sail panels $50 GT rear bumper $50 (has small crack on corner) Door panels $15ea Fuel door with cable $25 Rear quarter panels $20 ea Sunroof section (windshield pieces broke off) $10 Rear decklid torsion springs for GT with spoiler $35 GT spoiler (faded needs painting) $100
Drivetrain:
V6 auto axles 176k miles, no visible tears $30 2.8 ignition coil from 86 GT 176k miles $5 Auto shift cable from 86 GT $40 V6 air intake box $10
Interior:
Tilt steering column (auto) $50 85 GT speedo, tach w/oil pressure, temp/gas gauge $5ea GT steering wheel (faded and has a split in leather at junction) $15 Rear bulkhead upholstery panel $15 Driver seat tracks with springs/bolts $20
Misc Parts:
Heater core for A/C $30 Master cylinder from 86 GT $5 Brake booster $5 Trunk latch $5
Those are most of the parts I have, ask if you don’t see what you need.
[This message has been edited by Jfrost (edited 08-16-2012).]
IP: Logged
09:29 PM
PFF
System Bot
Apr 10th, 2012
Jfrost Member
Posts: 1092 From: Brookfield, IL Registered: Jul 2009
I want to keep the engine together to sell as a complete assembly. I do have some parts left from a V6 I parted out a while ago, are you just wanting the temp sensor from the head?
IP: Logged
11:11 AM
Apr 24th, 2012
John Miller Member
Posts: 344 From: Freemansburg,Pa USA Registered: Dec 2002
Do you have the heat vents for the engine ?Are they all the same for the different year GT's?I only need the passenger side but I wll take both if you have them and don't want to split them up.
IP: Logged
08:36 PM
Racer_JT Member
Posts: 1419 From: Lynchburg, Virginia, USA Registered: Apr 2002
Do you have the heat vents for the engine ?Are they all the same for the different year GT's?I only need the passenger side but I wll take both if you have them and don't want to split them up.
Sorry I don't.
quote
Originally posted by Racer_JT:
both aero skirts front aero nose drivers side gt sail panel or both sides?? set of factory headlights (everything motor and housing)
Only thing I have from that list are both inner sail panels, prefer to sell them as a set.
IP: Logged
09:41 PM
May 10th, 2012
shinesley Member
Posts: 118 From: Boca Raton, Florida Registered: Jun 2009
------------------ ~Stan http://www.facebook.com/big.life.band ----------------------------------------------------------------------------------- "No, it's not an MR2!!!"
IP: Logged
02:42 PM
PFF
System Bot
shinesley Member
Posts: 118 From: Boca Raton, Florida Registered: Jun 2009
------------------ ~Stan http://www.facebook.com/big.life.band ----------------------------------------------------------------------------------- "No, it's not an MR2!!!"
IP: Logged
02:43 PM
Jul 11th, 2012
Jfrost Member
Posts: 1092 From: Brookfield, IL Registered: Jul 2009
The part I need is the bracket that attaches to and secures the dogbone to the engine block on the rear side facing the trunk. It sits at a 90 degree angle inward of the dogbone/bushing and is bolted down to the rear valve cover. The dogbone is secured to this bracket.
If you have this available it would be greatly appreciated.
[This message has been edited by I FAR I (edited 08-17-2012).]
Originally posted by I FAR I: The part I need is the bracket that attaches to and secures the dogbone to the engine block on the rear side facing the trunk. It sits at a 90 degree angle inward of the dogbone/bushing and is bolted down to the rear valve cover. The dogbone is secured to this bracket.
I think I might, I'll check and let you know.l
quote
Originally posted by rwlekey:
Do you have a passenger side mirror (not the housing, motor, or actuators, just the mirror)? Thx.
I do not unfortunately.
IP: Logged
09:28 PM
johnyrottin Member
Posts: 5487 From: Northwest Florida Registered: Oct 2007
