PLEASE CONSIDER THIS THREAD CLOSED FOR THE MONTH OF JUNE - moving and just do not have the time to answer PM's/price/box/ship the parts I do not need. I will be only taking the parts I want/need to the new house, so in Late June I will start another thread for the items that are left and must be gone by June 30th. My 13" brake kits will still be sold during this move.
After spending the last 6 years waiting out the real estate market, I have decided it is time to take the plunge once more and buy a house in KY... my current lease is up in June, so I am looking to sell quite a bit of my stock pile of parts (lots of 88 specific stuff and GT/Fastback) to save me from packing it all up and moving it a few miles away.
BLUE GT HAS SOLD... I am currently interested in parting this 88 fiero out. it has spent most of its life in KY and a rot free car. If you see anything on this car you are interested in purchasing, please PM me your offer.
I have 4 sets of Fastback tail lights on the shelf - conditions range from decent with minor delamination to poor 2 rear wings several sets of fastback engine vents and 1/4 window triangles Lots of body panels/fascias (mostly 88 coupe and Aero - no bumper pad) Lots of grey interior plastic pieces 5 long manual transmission axles... probably the same # or more of the short side too 2 88 fuel tanks
Set of 4 88 GT/Formula wheels - used serviceable condition for a daily driver - not MINT / SHOW condition - $75 - local pickup only
I have 2 full sets of the Millie Miglia 16x7 5x100 38et wheels that I might consider selling for $500+ shipping per set. One set has 245/45/16 tires and the other set has 205/50/16 snow tires. The 245 ones are on the blue car above.
I have several 88 front/rear suspension setups, so if you are looking for some 88 suspension stuff, let me know what you are looking for and what you want to pay and I will see if I have it.
88 Rear Cradle Fixture - for building Tubular 88 rear cradles or for relocating cross-members for engine swaps. It picks up the stock cradle and suspension locations. You can raise the lateral link plates to alter the elevation of them.: $500 - local pickup only:
I can get pictures of anything people are interested in so feel free to ask away.
If I have worked on/posted about something you thought was cool and would be interested in purchasing, I might be willing to sell my prototypes... so feel free to PM me.
I am not getting out of Fieros... nor am I stopping my R&D focus on 88 brake/suspension upgrades. I will be keeping two 88 fieros (my DD and the LS4/F40 one) and will still have a huge lot of parts to move, but wanting to lessen the burden of the move some and generate some additional cash for the move and expanding my metal machining/fabrication tool collection.
[This message has been edited by fieroguru (edited 06-04-2012).]
Is that a battery relocation tray I see up front? Do you have the needed cables too?
LMK and TY
Best of luck with you migration!
Edit; thats a dang headlight assembly huh? oh well...
There is a battery relocation, but it is under the head light. $125 shipped (lower 48 states) I will include the tray, battery hold down, cables (both go all the way back to the engine), battery shut off and the firewall bulkhead pass through.
Happen to have a Formula/Coupe front bumper air deflector?
- DEFLECTOR HAS BEEN SOLD
I need to see if I can coil it up in a box that I can actually mail. $20 for the part + whatever shipping ends up. You will probably need to let it sit in the sun to get it back to the original shape once I coil it up for boxing.
[This message has been edited by fieroguru (edited 04-14-2012).]
IP: Logged
10:47 AM
Fiero Thomas Member
Posts: 4669 From: Round Lake Beach, IL Registered: Jul 2005
Needing a front round passenger side marker light for my 88. shipped to 77364. Thanks -Joe
All the moldings/lights are $20 each shipped to the lower 48. I will provide further discounts for multiple moldings. The Blue car still has a full set with it (that I am willing to part out) and I have these that I pulled off the shelf (might still have another stash deeper into the abyss). These are all used and will probably need cleaning and possibly some over-spray cleaned off:
These all are damaged in some way. Most are chips or breaks at the ends - This whole lot is $25 shipped:
I also have several fenders and door panels with the smooth molding still on them as well.
IP: Logged
10:56 AM
fieroguru Member
Posts: 12303 From: Champaign, IL Registered: Aug 2003
Here is a deeper look into the abyss that is my basememt/storage area...
BOTH FUEL TANKS AND SENDERS ARE GONE - two 88 fuel tanks $75 each - local pickup only Non-sunroof panel - $50 - local pickup only
Two LS4 water pump setups - $200 shipped each
Several seat belt receivers .... I have a couple tubs of small interior stuff like these - all are from grey cars, never parted out a beachwood car:
ALL FRONT FASCIAS ARE GONE - Stack O' Front Fascias - all 88 coupe or Areo. The top one I believe is a NOS RIBBED Areo Fascia that has never been painted. It has a couple of rough spots from poor storage before I aquired it. There is a Rear Fascia Stack behind these:
Another Fastback panel and rear GT fascia and lots of other stuff...
Stack of notchie rear panels, fenders, door skins, a Fastback rear section with the C-pillars removed (4th gen hatch mod), some more fastback grills/triangle trim...
Rear wings:
ONLY 1 FASTBACK TRUNK SEAL LEFT - 2 fastback trunk seals and more GT vents:
Collections of 88 rear lateral links (the ones I have actually taken the time to remove - have several more sets still attached to the uprights)
88 Front suspensions (I have one more deep in the back of the basement that has already had the mounting holes slotted for installation in an 84-87), and the one under the blue car (rebuild with all new ball joints/poly back in 2005):
[This message has been edited by fieroguru (edited 05-31-2012).]
IP: Logged
12:07 PM
thismanyfieros Member
Posts: 3468 From: Red Deer, alberta,canada Registered: Dec 2002
I am needing this rod. It goes from the key cylinder to the lock, Passenger side. Is a mirror opposite of a left side rod. Real easy to remove with the door skin off.
MAybe throw one in the package with teh round side marker light? -Joe
IP: Logged
07:15 PM
fieroguru Member
Posts: 12303 From: Champaign, IL Registered: Aug 2003
I am needing this rod. It goes from the key cylinder to the lock, Passenger side. Is a mirror opposite of a left side rod. Real easy to remove with the door skin off.
MAybe throw one in the package with teh round side marker light? -Joe
I am not wanting to canabalize the blue cars doors yet, but I have been driving around for a week with 2 fiero doors in the bed of my truck (waiting for the scrap metal place to be less muddy), but alas there is nothing left from the locking mechanism in either door. If I sent you this longer mostly straight rod could you bend it into the shape you need?
I do also have 2 more doors from an 86 SE Aero that are deep in the back of the basement and not easily assessable. I will eventually make my way back to them and they should have the rods.
[This message has been edited by fieroguru (edited 04-14-2012).]
IP: Logged
07:47 PM
josef644 Member
Posts: 6939 From: Dickinson, Texas USA Registered: Nov 2006
I will wait for a real rod. Thanks for looking. Don't destroy anything looking for me a lock rod. I could make me one here, just don't have a way to make the little groove on both ends for the retainer clips. Thanks -Joe
[This message has been edited by josef644 (edited 04-14-2012).]
I need the following: - Passenger side cooling tube for an 88 GT - Muffler heat shield for an 88 GT... possibly more parts to make the rear end "whole" again. PM me with your email address and I'll send you a pic.
Parts will be shipping to 46819 Thanks!
------------------ -Chris '85 V6 SE 4sp (SOLD) '88 GT Auto (fun car) '99 Kawasaki Vulcan 500, owned since new '03 Sentra SE-R Spec V (Daily driver) '09 G37x w/ Premium & Nav (wife's car)
IP: Logged
02:53 PM
87antuzzi Member
Posts: 11151 From: Surrounded by corn. Registered: Feb 2009
Would you be willing to ship all of the mounting hardware for the aero front fascia (possibly excluding the impact bar) but at least including the honeycomb, mounting brackets, and any air dam pieces?
