For sale: distributor, coil, egr, aux gauges and more! by ConvictedRedneck
Started on : 04-22-2012 12:14 PM Replies : 17 Last post by : ConvictedRedneck on 02-27-2013 12:14 AM
Apr 22nd, 2012
ConvictedRedneck Member Posts: 1034
Everything is best offer + actual shipping.
-- V6 distributor w/ Accel cap and rotor and rare earth magnet mod:
--
V6 EGR valve: SOLD
-- MSD streetfire coil:
-- SOLD:
Mookeeh Gauges: All are "Mookeeh MK1" gauges, which face with blue "E-glo." They all have the necessary hardware and wiring to install them. The boost and oil pressure are both mechanical readings. Volt and narrowband A/F have proper wiring with them. The Volt and Oil are brand new, boost and narrowband A/F are used but working condition from what I'm told. Narrowband A/F gets wired into the stock O2 sensor wiring/ecm pins, whichever you'd like. They are all 52mm, or 2 1/16" .
-- 24lb 5.0 Mustang injectors:
Not pictured:
-- '87 2.8 5-spd Getrag ECM w/ tray:
-- '88 4cyl ECM tray for 7730 conversion:
-- 7730 ECM w/o pigtails
-- V6 MAP Sensor
-- V6 Power pulley
-- 180* Stant thermostat
[This message has been edited by ConvictedRedneck (edited 02-18-2013).]
IP: Logged
12:14 PM
PFF
System Bot
Apr 23rd, 2012
ConvictedRedneck Member Posts: 1034
All prices OBO
IP: Logged
06:32 AM
nyranger6830 Member Posts: 681
Apr 24th, 2012
ConvictedRedneck Member Posts: 1034
Replied. Bump for the day crowd
IP: Logged
06:46 AM
Apr 27th, 2012
ConvictedRedneck Member Posts: 1034
Going away for the weekend bump.
IP: Logged
06:37 AM
Feb 5th, 2013
ConvictedRedneck Member Posts: 1034
Bumped. Everything is best offer + actual shipping. Need this stuff out of my sight!
IP: Logged
07:08 PM
coady Member Posts: 934
will the 24lb 5.0 Mustang injectors work in the 2.8?
IP: Logged
07:35 PM
Feb 6th, 2013
ConvictedRedneck Member Posts: 1034
They do...sorta. I'm currently using another set of the same injectors in my car. They're a little shorter than the stock injectors though so I had to use an injector o-ring as a spacer above the injector where it goes into the fuel rail. Also, there's some debate as to whether injectors other than pintle-style run properly on the stock ECM. These have 4 holes at the base...I believe it's some form of a Multec injector but I could be wrong.
------------------My turbo build
IP: Logged
02:43 PM
Feb 8th, 2013
ConvictedRedneck Member Posts: 1034
Bump. I know having no prices listed is a pain but that's because I'm open to ANY offers, don't be afraid to make one!
IP: Logged
07:20 AM
Feb 10th, 2013
Knight Rider Member Posts: 419
PM Sent
IP: Logged
10:37 PM
Feb 11th, 2013
kev63rod Member Posts: 109
pm sent.
IP: Logged
01:53 PM
PFF
System Bot
Feb 12th, 2013
ConvictedRedneck Member Posts: 1034
All PM's replied to.
[This message has been edited by ConvictedRedneck (edited 02-15-2013).]
IP: Logged
06:33 PM
Feb 14th, 2013
kev63rod Member Posts: 109
money sent. think i did it right.
IP: Logged
01:46 AM
Feb 15th, 2013
ConvictedRedneck Member Posts: 1034
Got it! Thanks!
All other PM's replied to.
[This message has been edited by ConvictedRedneck (edited 02-15-2013).]
IP: Logged
06:44 PM
Feb 18th, 2013
ConvictedRedneck Member Posts: 1034
Bump, waiting for some people to return PM's.
IP: Logged
01:51 PM
Grantman Member Posts: 1420
so what's still for sale?
IP: Logged
02:12 PM
Feb 21st, 2013
ConvictedRedneck Member Posts: 1034
quote Originally posted by Grantman:
Everything except the EGR valve and gauges.
IP: Logged
07:09 AM
Feb 27th, 2013
ConvictedRedneck Member Posts: 1034
"Going to the post office tomorrow" bump
IP: Logged
12:14 AM
.JPG)
.JPG)
_(Small).jpg)
.JPG)
