Ive got stuff just sitting around Im thinking what I have to some of you is "fiero-gold" that I dont care about, and what i'm going to try to do is sell it. That, and just some random parts. I've thought of the prices, but fair offers will be taken for consideration as well.

All of the items being listed are either sitting around waiting to be installed, or on a car waiting to be stripped when/if they sell.
all are in used condition.
My goal is to get rid of some of my fiero-parts-cache and make a little extra to spend or save,
dont try to lowball me, I'm not hurting for money, the prices are negotiable but some arent, because ive been planning on using some of them.

1.) 88 GT rims. (dirty, no damage but from normal wear) (pics posted down below)
200.00 as a set +S&H

2.) Complete set of Holley aftermarket parts for the 2.5L Iron Duke.
(1 of the tabs on the scoop is broken, rocker cover cracked, missing original intake cover washer nuts replaced with rubber)
550.00 for the set +S&H







here is where I siliconed the crack shut. it cracked from being overtightened, it was repaired, the ground down too much where it cracked again, and then that is when I discovered it leaking oil from there.






3.) MSD 6A (6200) series with MSD blaster coil, coil bracket, and wiring. (working)
100.00 +S&H




4.) Reman/Upgrade Distributor for 2.5L Iron Duke. (basically new bought and used for engine break-in then parked)
75.00 shipped.



5.) (SOLD) Steel Poly dogbone for 2.5L Iron Duke. (a little rusty, it can be cleaned up, still in useable condition)
15.00 +S&H



6.) (SOLD) Black HURST shift knob for M/T (nascar 50th anniversiary in gold colored lettering inside)
30.00 +S&H



7.) Rear sway bar and hardware. (for the 84-87 fiero)
100.00 +S&H



8.) (SOLD) Complete 88 bezel trim set for an A/T fiero. (in almost new condition, nothing broken, only a little wear from time, faded ashtray doors) 50.00 +S&H



9.) 2 complete OE fiero subwoofer assemblies. (untested)
15.00 each. +S&H

10.) (SOLD) 2 OE amplifiers w 2 slide controls, and 1 harness for it. (untested, plug going to radio was cut from someone taking the radio)
50.00 +S&H all together.


11.) 2 rally/auxilliary gauge pods. (untested, the foam moulding has unpeeled on both housings, housings are iffy)
20.00 each shipped.

12.) (SOLD) 1 88GT gauge cluster. (milege reading is at 137946.0 miles, untested)
60.00 +S&H



13.) vacum gauge. (bought and was fitted to flat tray on a base coupe (where the electric window and mirror swiches go) new never used)
15.00 shipped.

[This message has been edited by AL87 (edited 09-11-2012).]

How much for the rear sway bar and hardware. And what diamaeter is it?

quote Originally posted by gambler85: How much for the rear sway bar and hardware. And what diamaeter is it?

PM me with an offer. and we will negotiate from there, and the bar seems to be the 7/8" one. its the same one from the fiero store.

Pm sent

quote Originally posted by gambler85: Pm sent

you have a reply.

bump, I'm going to get shipping quotes today.

PM sent

quote Originally posted by speed1: PM sent

you have a reply.
For speed1 I'll be waiting for a reply from you, and after we make or break a deal, im going out to get quotes. for you and my other potential customers. I prefer UPS, and the USPS.

For any potential customer, I'd like to leave out to get quotes by 3pm. I'm home and online all day, and I check back every ten minutes for PM's if I'm home.(if im PMing with someone I'll obviously be right back at ya within a few minutes.
I'm usually around in my shop working on my own fiero.
I'm trying to get rid of this stuff instead of letting it sit here chancing it to rot beyond any use.

And one more note. I am going to prom with my girlfriendf this weekend, and will be consumed with preparations late in tthe day, after 4pm* Her and I have to allot two days this week, 1 to take dance lessons, 1 to craft masks and practice dancing
(I forgot to mention the theme is a masquerade). wednesday and thursday seem like the two days I'll be doing this.

[This message has been edited by AL87 (edited 05-08-2012).]

good luck as prom my man ah how i miss that.fast car fast women and fast times in high school god how i miss that lol

------------------
"Speed costs money. How fast do you wanna go?"

quote Originally posted by jaredmurray88: good luck as prom my man ah how i miss that.fast car fast women and fast times in high school god how i miss that lol

Im just lucky that I have a girlfriend young enough to give me the oppurtunity, lol. I never went. and then I graduated. so heres to a second chance.

gambler, outlaw and the others who just pmed me, you all have replys. I got confused with some of you while typing my replys, there were so many I sent out. sorry if I got you confused, I re-did all my replys, lol.

bump

bump.

prices reduced.

No curb rash from what Ive seen of these.
some soap and a scrub will clean these up nicely.

[This message has been edited by AL87 (edited 05-23-2012).]

Got my parts today, thanks a million.

If the rear sway bar isn't sold I want it!

PM me if it hasen't sold.

also interested in just the holly throttlebody.

I have the valve cover and aircleaner housing already with my INDY Pace Car.
but no Holley Throttle Body.

let me know a price and we can talk.

Thanks!

rpro, you are welcome, I hope everything looks alright. and is to your liking.

gtx, the swaybar hasnt been sold, and you have a pm.

Wondering if you would sell the tachometer seperate and if it works correctly not reading too high?

quote Originally posted by gmctyphoon1992: Wondering if you would sell the tachometer seperate and if it works correctly not reading too high?

you have a pm/reply

bump

Posting to leave feedback on the shift knob.

swaybar is still here, sunday bump.

how much do you want for the 88 gt rims??

quote Originally posted by Cruza: how much do you want for the 88 gt rims??

Cruza, you and a few others have pm's

do you still have the gauges?

PM sent

i just found the 88 duke throttle body to go along with the intake manifold and head, perfect for those who might want an extra set to have off car to port and polish for an easy fast off-and-on in a day project to have unrestricted performance.

quote Originally posted by Fiero STS: PM sent

Your parts should be srriving sometime next week.

88 A/T Coupe shift cable sold.

im making sales.

The prices have been adjusted to sell.

payment sent for poly dogbone

If you were not asking tripple what the holley crap is worth I would take it.

I4 poly dogbone sold.