I have 2 clutches for sale for those doing a 3800 swap with a manual trans conversion. There is NOTHING wrong with either clutch, Both are BRAND NEW. The reason im selling is because when I first started my build I wanted to have a manualtrans and I wasn't willing not to have it. Since then I have gotten a little wiser and decided i didnt want to blow my getrag up every time I hit the gas to hard. Unfortunetly I now have two clutches that are usless to me. Good news for you I want them gone. I will only accept paypal. Also I would rather not sell the flywheel separate from the clutch.
1. Spec stage 3+ with add on for an additional 105 ft lbs clutch plus flywheel and all mounting hardware including arp flywheel bolts. (clutch was used when my engine was balanced hence the small amount of wear in flywheel from being bolted to engine and what not. Strictly for balancing though was never actually used to apply any power or anything like that.
SOLD
2. Clutch Built by mera7. This took me a looooong time to get and fought the entire way. What I bought from him was full face Kevlar puck style clutch and stage 5 pressure plate. Link to his post when he sold them... https://www.fiero.nl/forum/Forum4/HTML/055272.html
What I paid 890.00 Asking 350.00 + shipped to the u.s.
[This message has been edited by hammer18 (edited 06-12-2012).]
That was my understanding when I bought the clutch and flywheel from them. Ill bring my micrometer home from work tomorrow and measure it and post up pics.
IP: Logged
09:51 PM
hammer18 Member
Posts: 383 From: Maplewood Minnesota Registered: Jun 2007
