Parting out 86 GT and 87 base model. Have lots of good body parts and interior parts, switches, motors, relays, harnesses, some chassis parts, engine parts and the usual misc. Let me know what you need and what you're willing to pay. Would prefer that those needing body parts be able to pick up. Other wise I have to charge for crating.

pm sent

[This message has been edited by coady (edited 09-30-2012).]

Is the 87 coupe an automatic or 5-speed? Does it have ac?

Auto with A/C.

Pm sent

pm sent

Need a 2.8 cabin side exhaust manifold.
Thanks, Ray in TZ.

Still have lots of parts left. GT taillights, ft and rr bumper facias, rear clip, some wiring and switches, Lots of interior parts, sunroof glass and wind deflector and under hood storage parts, drip rails, and most of the base model parts. Parts missing from base model, engine and cradle, some wiring and ac pats.

PM sent...

Bob

Coolant overflow bottle perhaps?

How much for the 87 rebody bumpers fenders ext. No clip or hood

PM's sent to Cro577 and Phirewire.

what color is the interior of the 87 I am looking for a gray seat cover , and the switch and backer plate for the trunk poper on the dash.
shipped to 46755
pics would be nice of what you have

PM sent

PM sent.

pm sent

I need good window switches, the shifter bezel with coin tray and stock plastic cover, center vent bezel with stock face.

All of my vinyl is peeling from the plastic and bubbling. Need something nice and not bubbling and puffing at the seams.

So many requests, So little time. If I have not responded to your request, I will get to it soon. I am going on vacation and will be back on the 27th. I will send pics, info and etc. at that time.Thanks.

Thanks to everyone for being patient. Processing requests. I still have a lot of parts left from both cars. Items I don't have include dash face plates, shifter surround plates, 5 speed shifter and trans parts, good window motors, sunvisors and seats. I do have GT front and rear bumpers, rear clip, ( no deck lid), wiring harnesses and interior parts. If you need something let me know. I going to have to send these things to the scrap yard soon. Thanks

You have a pm

How much for the GT front bumper? Good shape? pic?
Ship with Grayhound you just need to shrink wrap with cardboard covering the ends (mainly for support).

PM sent

would you do a passenger window?--no scratches?--how much to 22191

------------------
Pat Jones

Do you have a drivers side electric mirror to fit 87 GT? If so how much to 37303?

[This message has been edited by NiotaFiero (edited 11-09-2012).]

GT tail lights and how much to SLC,UT 84107?

Thanks for your requests. PM's sent.

PM sent.

How nice are the base cars sail panels and tail lights? How about a radio bezel? How much?

Are the lower radiator supports any good. No the long tubes, but the piece the radiator sits in.

Do have the rear bumper from the 87 base coupe and the
runners from your GT?
If so can you send photos

Tim

Where do I find a PM?

I need "D" plates for the squared trunk in the GT and the weather stripping if it's good, the inner fastback panels, any smooth mouldings that are on the car including marker lamps, decklid hinges, engine vent mounts, still have the GT tail lights? If the interior is gray I would also be interested in the aux guages and radio/hvac housing to accompany that. PM me with price/availability shipped to 52205. Thanks.

If you could post a pic of the GT tail lights, unless someone else has committed to buying them, it'd be appreciated!

you have a pm for the window

------------------
Pat Jones

Where do I find a PM?

Once you are logged in, go to the top of the page, in yellow text you should see "Pennock's Fiero Forum" (it takes you to the 'main index'). Once there, scroll all the way to the bottom, you should see a white heading that says "Private Messages" and in yellow under it "Inbox". Click there to get to your PMs.

Thanks for the info.

PM sent.

Pm'ed