Sold.

[This message has been edited by Jfrost (edited 05-21-2013).]

Bump, still available.

quote Originally posted by Jfrost: I have a set of ceramic coated ZZP 3800 headers for sale equipped with an EGR tube. They could probably use a re-coating as the ceramic is faded and chipped in a few spots. Pictures are available upon request. These originally came off of my GTP and I was going to use them on my L67 swap into my Fiero. Unfortunately they won't fit using the 4spd Muncie trans. They go for $699.99 new with the EGR tube. I'm asking $550 plus shipping. These will work great on any 3800 using the 4T65E-HD trans.

Those are kick ass headers as they use 1 5/8" primaries and make the engine breathe great. . Trunk mods are needed to install them properly

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Powerlog manifold, Northstar TB, LS1 MAF, 3" Flotech Afterburner Exhaust, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

quote Originally posted by Dennis LaGrua: Those are kick ass headers as they use 1 5/8" primaries and make the engine breathe great. . Trunk mods are needed to install them properly

Yes they are! You are right, trunk mods are needed for these to fit properly, I did forget to mention that.

I updated the original post with pictures.

TTT

Bump.

I'm open to offers.

Will they fit an 88 w/getrag?

Honestly I don't know but I do believe there would be some interference with the crossover pipe and the shift bracket.

Bump

Bump

Bump

bump

Christmas bump

I have these mounted with a 6sp G6...

------------------
http://i252.photobucket.com...ec/2007_12240001.jpg

Good to know if I ever go that route in the future.

quote Originally posted by Dennis LaGrua: Those are kick ass headers as they use 1 5/8" primaries and make the engine breathe great. . Trunk mods are needed to install them properly

They're actually 1-3/4" primaries.

Bump

Bump

what trunk mods are needed

quote Originally posted by runner92: what trunk mods are needed

As far as I know you'll need to cut a portion out of the lower trunk to make them fit, I'm guessing much like using other 3800 style headers.

Bump

What's the price at now?

Price still stands but I can work with you if you're seriously interested. PM me.

quote Originally posted by Jfrost: As far as I know you'll need to cut a portion out of the lower trunk to make them fit, I'm guessing much like using other 3800 style headers.

so if i bought a 3800 Fiero and the Org rear Trunk is shorter, maybe 1/2 with a plate welded, not sure....but if the hole is there these will work?

[This message has been edited by batousai666 (edited 03-01-2013).]

I do believe they will fit with the trunk and so long as you have a 4T65E trans.

quote Originally posted by Jfrost: I do believe they will fit with the trunk and so long as you have a 4T65E trans.

ooooo i have the 4T65E HD....is that a problem??
whoops...i see in the first post "HD" will work, also.....i have my eyes on these.
its up to the IRS now....and the PostOffice
thanks for the info

[This message has been edited by batousai666 (edited 03-01-2013).]

quote Originally posted by batousai666: ooooo i have the 4T65E HD....is that a problem?? whoops...i see in the first post "HD" will work, also.....i have my eyes on these. its up to the IRS now....and the PostOffice thanks for the info

Do you really want to cut your trunk?

quote Originally posted by batousai666: ooooo i have the 4T65E HD....is that a problem?? whoops...i see in the first post "HD" will work, also.....i have my eyes on these. its up to the IRS now....and the PostOffice thanks for the info

They will work with the HD version. Keep me updated if you'll want these.

quote Originally posted by solotwo: Do you really want to cut your trunk?

its already hacked, but the PO welded a thicker gauge sheet over it. it gets soo hot i had to take the carpet he had in there and $50 off the selling price for all the condensation burning off, but i thought it was white smoke on its way to blackand a fire!!

as far as my interest in these was great, till i got my job back today. i think and reckon i will get a new set off the shelf because they (ZZP) is only 50 miles from my house and for not tooo much more $$ brand new.
i'll tell you this shoot me a PM with your rock bottom, lowest price and i will consider it, fair enough?

[This message has been edited by batousai666 (edited 03-01-2013).]

PM sent.

quote Originally posted by Jfrost: PM sent.

recieved and responded.....i have to pass.
i almost have to, seeing as ZZP is just up the road a spell for me
good luck....with this sale

Why don't you post your new price. Maybe its a lil too high. If those headers need to be recoated they will cost more than new.

Bump

Lowered asking price.

Bump

Bump

Bump

TTT

PM sent

Headers are sold!