Fiero rear coilovers - poly bushings by daveheld
Started on : 11-06-2012 08:36 PM Replies : 25 Last post by : daveheld on 11-15-2012 08:13 PM
Nov 6th, 2012
daveheld Member Posts: 95
If you are making your own rear coilovers with 2 1/2" springs, you will benefit by using these poly bushings to center the spring.
I have a big bag full of these (44 total) from when I made coilovers. They were 'lost' in a closet...
I paid about $2 - $3 each when buying them 100 at a time. I'll sell the lot for $88 or $10 / pair
IP: Logged
08:36 PM
PFF
System Bot
daveheld Member Posts: 95
Here is a pic showing the location of the poly bushing I'm talking about... arrow indicates
IP: Logged
08:41 PM
fffttt1 Member Posts: 662
PM sent
IP: Logged
09:10 PM
CheshireGrin Member Posts: 693
Will take a set !! (Can't pm from my phone )
IP: Logged
09:46 PM
daveheld Member Posts: 95
i very rarely check pm
IP: Logged
10:32 PM
Nov 7th, 2012
IIKool Member Posts: 1288
Tried to send you e-mail @ dave at team321 dot com and doesn't work
IP: Logged
07:44 AM
GKDINC Member Posts: 1812
E-mail sent
IP: Logged
05:18 PM
daveheld Member Posts: 95
i will reply to everyone tonight... thanks for your patience.
IP: Logged
07:39 PM
daveheld Member Posts: 95
To keep things simple, I'm just going to ship US Postal flat rate... $5.50
IP: Logged
09:15 PM
Nov 8th, 2012
IIKool Member Posts: 1288
E-mail sent
IP: Logged
07:19 AM
daveheld Member Posts: 95
10 pairs left - thanks guys
IP: Logged
07:39 AM
PFF
System Bot
IIKool Member Posts: 1288
Monies sent
IP: Logged
10:14 AM
blakeinspace Member Posts: 5923
email sent for 2 pair
IP: Logged
11:27 AM
CheshireGrin Member Posts: 693
$$ sent.
IP: Logged
12:30 PM
Tconz4 Member Posts: 13
Just sent you an E-mail, Thanks
IP: Logged
07:41 PM
Nov 9th, 2012
daveheld Member Posts: 95
i had an emergency biz trip yesterday... I'll be back to check email on Friday night.
IP: Logged
09:12 AM
MulletproofMonk Member Posts: 3088
IP: Logged
09:29 AM
FieroGTguy Member Posts: 3087
So a full set to include both sides would be $20? Eric how bought it from you was sending some parts to show off your work. I already have the front slalom racing suspension, 12" Wilwood upgrade w/ proportioning valve + e-brake (unfortunately still in the box without installation instructions).
Please PM your response w/ Paypal info?
Thanks,
Greg
[This message has been edited by FieroGTguy (edited 11-09-2012).]
IP: Logged
10:02 AM
daveheld Member Posts: 95
Not sure what you mean by your question of a "full set"?
IP: Logged
09:39 PM
Nov 10th, 2012
blakeinspace Member Posts: 5923
sent you a paymail this evening!... thanks, sir!
------------------www.northtexasfieroclub.org
IP: Logged
12:25 AM
daveheld Member Posts: 95
4 bushings left (2 pairs)
IP: Logged
11:56 AM
PFF
System Bot
Nov 14th, 2012
blakeinspace Member Posts: 5923
Dave, I recieved my bushings. Thank you for prompt shipping.
IP: Logged
09:43 AM
FieroGTguy Member Posts: 3087
quote Originally posted by daveheld:
Sorry, since the pic didn't show the full assembly, I didn't know if they were for both ends of the spring. Any idea what lbs the extra compression will affect the spring rate?
Also, will poly grease be needed to avoid potential sqeaks?
Thanks,
Greg
[This message has been edited by FieroGTguy (edited 11-14-2012).]
IP: Logged
11:16 AM
Nov 15th, 2012
Jefrysuko Member Posts: 3491
quote Originally posted by daveheld:
I'll take them if still available. Sending you a E-mail as well.
IP: Logged
09:28 AM
Rick Vanderpool Member Posts: 234
PM sent
IP: Logged
03:58 PM
daveheld Member Posts: 95
all gone... thanks to those who purchased.
IP: Logged
08:13 PM
<---- did you buy Cliff a beer? 
