EDIT:

I have (2) more of these trays available. I'm looking to get $25 shipped each to the US.

[This message has been edited by Jfrost (edited 04-27-2013).]

PM sent on both.

------------------
-Brian

My 87 GT Poly Suspension Upgrade (all pics) thread
Removing the roof panel
My HUD install thread

If you don't mind me asking...What are they out of?

Bob

quote Originally posted by RCR: If you don't mind me asking...What are they out of? Bob

2000+ S10

quote Originally posted by Jfrost: 2000+ S10

Thanx I'll have to keep my eyes open for one

Are you guys using this tray to mount the PCM in teh stock location? I just mounted mine there today and its a very tight fit w/o the tray and with the PCM flipped around (fins against fire wall). I assume you would have to remove the back side of the glove box?

quote Originally posted by ALJR: Are you guys using this tray to mount the PCM in teh stock location? I just mounted mine there today and its a very tight fit w/o the tray and with the PCM flipped around (fins against fire wall). I assume you would have to remove the back side of the glove box?

That was my original idea, but then I found I could just use some nice velcro adhesive strips to mount the PCM behind the glove box. From the research I did I've seen people mount the trays with and without having to mod the back of the glove box.

I'll be hitting the local junkyards again soon to see if I can pick up a few more of these.

quote Originally posted by Jfrost: That was my original idea, but then I found I could just use some nice velcro adhesive strips to mount the PCM behind the glove box. From the research I did I've seen people mount the trays with and without having to mod the back of the glove box. I'll be hitting the local junkyards again soon to see if I can pick up a few more of these.

I used velcro to kind of hold mine in place; the installation of the arm rest further holds it in place. I would much rather have a more secure, stock looking device; but as it is, I had to remove the sheetmetal bump-out on the fire wall and the insulation off the back of my arm rest...

Bump, more trays available.

I will take one at that price...please send me PM

PM sent.

I'd like one of these too. Just sent you a PM.

PM's replied to.

All trays are spoken for pending payment.

Got mine today. Excellent packaging and nice part. Thanks!

quote Originally posted by gtoformula: Got mine today. Excellent packaging and nice part. Thanks!

Glad it got to you safe.

2 trays still available.

Bump, 2 available

Bump

Bump

TTT

[This message has been edited by Jfrost (edited 05-01-2013).]

Bump

TTT

------------------
Project L67 Fiero

This mine. I used a stock tray. I like the back of the glove box cutout because I can open it up at the track for extra cooling. Also it's easier to get to my Flux Capacitor. (Bluetooth for the Torque App and tuning.)








GLWS

[This message has been edited by hercimer01 (edited 05-15-2013).]

Thanks! Thats a real nice set up there.

Both trays still available.

Bump

TTT

Bump

Bump

TTT

Bump