I hope so. These covers are awesome. I had a set on my previous Fiero, along with his flush mount headlights. Unfortunately, that car is gone and so are the headlights and covers.
I purchased the used headlight set that just showed up on this forum, so I want the turn signal covers to complete the look. PM me if you have leads. Thanks.
I would bet a search on this site or on google would find images for you. I also have some threads that I started, you might be able to research and find my last 88' (red GT) with the covers and headlights. Essentially, it's a smoked piece of plexi-glass that's been form-fitted to be about the same size as the front turn-signal opening. when installed, it makes the transition from the bumper to the turn signal opening flush. make sense?
Anyway, bump... no one has a set they NEED to get rid of ?
[This message has been edited by mnstrfiero (edited 01-02-2013).]
They look like this. This is actually Kris Munson and his old "demo" car. Mods include his Munson front fascia, flush mount headlights, and front turn signal covers.
If you do not know, Kris Munson died last year and had long stopped making these before his death.
[This message has been edited by Fiero84Freak (edited 01-02-2013).]
If someone starts making these then I'm in, it really cleans up the front bumper
Welcome to the party. lol
If I could get my hands on a set, I'll get details for reproduction from local plastic manufactorers. Of course, it sounds like someone might have beaten me to that idea... as we patiently await the release of the item! lol
He used a single clip to mount these, I hope the next person finds the correct mounting hardware.
FYI the molds (bucks) are made and I'm waiting on my manufacturer to go into production ... the single clip hold down are effective why change a winning combo ... I have been delayed a couple of times for clips and the first test run some air bubbles were forming on the lenses for unknown reasons... my manufacturer re-opens 7th january ... will have an update for you then ...
FYI the molds (bucks) are made and I'm waiting on my manufacturer to go into production ... the single clip hold down are effective why change a winning combo ... I have been delayed a couple of times for clips and the first test run some air bubbles were forming on the lenses for unknown reasons... my manufacturer re-opens 7th january ... will have an update for you then ...
regards Danyel
Have you heard anything from the manufacturer?
IP: Logged
12:23 PM
doublec4 Member
Posts: 8289 From: Oakville, Ontario, Canada Registered: Jun 2003
Originally posted by doublec4: Daniel, if things aren't working out with your manufacturer, let me know and I can probably have them made. Thank you
I am in line for the covers ... this is a large company and little guys like me are not their priority .. oh well the molds are ready and I'm just waiting on them ....I also have ready 1500 clips they arrived from the UK and are exactly like the ones on the chevy trucks ... If I see they are takin too long I'll give you a heads up ..
Did Tom, who made some Fiero parts (e.g. the air intake tube) pass away, also? I think he made the modified headlamp buckets, also, and was a really decent guy.
