I have decided to get out of fiero's for good at least for now and move on to other things. I just haven't had time to work on it in a while and I think its time to start letting stuff go. Everything is best offer and the bigger stuff would have to be shipped from Mansfield, MA.
Heres what I have from what I can recall
started as an 85 2m6 fiero auto.
Th125 auto was rebuilt before I bought it would have about 30k on it now 3.1lmpfi long block rebuilt with no more than 10k on it max. Was overheated once but no water in the oil. The upper intake is off of it right now 3.1l Tgp turbo set up. Have the TGP upper intake manifold, turbo (could use rebuild I believe), intercooler, crossover for the th125 and 3x00 manifolds. Multiple silicone intake couplings HKS Bov Kahines corvette panel with 4 vette bullseye tail lights fastback clip with newer cheap 1/4 windows. Looks good hood with molded mustang vent decklid with mustang vent/ filled spoiler holes scion TC wheels. will need tires Tan/black dash in good shape tan seats with speakers. drivers sead headrest has rip around one speaker. bottom boslters do not match between the pair. 88 front springs KYB struts and shock were new when I put them in 2 years ago has barely moved since. GT front and rear bumpers in good condition. Round molding set. complete I believe Kamei side skirts in good condition. Painted a maroon color 2 sets of GT tail lights. I have to look to make sure I still have both. One set had a crack near the keyhole in one light. The other just had delamination. 85 cradle nearly rust free. 2nd gen headlight set. I had been working on making a lower profile 4x6 set of buckets. I think I still have the originals you can have them both. Motors and relay did work. I could clip the connectors again so they can be wired into a pre 87 l like I did.
Thats all I can think of right now. Im sure Im missing things but if youre looking for something just ask. Im only looking to make some of the money I spent on it back and get rid of it. If someone wants to take it all at once Id let it go pretty cheap just to get it out of the way.
IP: Logged
10:20 PM
PFF
System Bot
Pontiacguy86 Member
Posts: 127 From: Sylvan beach, ny Registered: Apr 2012
I'll take a picture of the turbo stuff tomorrow. Some of it is still mounted on the motor other things I never got around to hooking up. I forgot that I have a fuel rail with yellow mustang injectors for the turbo as well but again the injectors have been sitting.
IP: Logged
11:11 PM
Feb 5th, 2013
Chooko Member
Posts: 192 From: Fallbrook, Ca. Registered: Nov 2005
Here are the pictures people were asking for. If anyone needs more/better pictures of anything let me know I took these quickly with my phone. I need to get a picture of the cracked taillight I have too. I found a performance sound setup I had as well. Have the light bezel and the stock sub enclosure with a newer sub that works to my knowledge. [IMG]
IP: Logged
05:33 PM
mtownfiero Member
Posts: 1779 From: Mansfield, Mass Registered: Mar 2007
I'll take the floor pan drain plugs underneath the seats on both sides if they're available and you're willing to remove them and they're in decent shape. Also, the trunk drain plug. Mine are all rusted out.
Just an update for anyone who was waiting on parts if i missed a pm to you (i think i got back to everyone) but we had a ton of snow and I have a pine tree laying in the middle of my pathway to my carport aside from the 2ft of snow. Going to try and get it all cleared up and pull parts friday.
I live local.. would like to stop bye to look at wheels,side skits, and maybe a few other things,, work mornings in the area (attleboro)are best for me, sat. I am going to the factory five open house, would sunday be an option.. I'm guessing weekdays are out as most work then.. let me know.. p.m. me or email is fine.. thanks
[This message has been edited by E.Furgal (edited 02-14-2013).]
