I have a cradle dropout leftover from my 3800 swap. It's out of a '85 2.5 liter Isuzu, and I made an effort to keep it as complete as possible. The engine had 185985 miles when pulled, so it's a little tired. I pulled a few brackets off of the transmission, but other than that it is complete up to and including the C205 / C500 connectors.

I'll sell it for $300, local pick up only in Traverse City, MI (49686).





I really can't imagine there's that many Fiero people up here, I've only seen a few. If I don't get any bites on the whole dropout, I'm willing to part it out. I'm not sure what a fair price is on all the parts, so we'll have to negotiate on a piece by piece basis.

I built my 3800 swap on a cradle that had been used for another guy's 3.4L swap. I have some parts related to that.

Poly mounts, note that one of the top brackets is missing from the mount, and an Iron Duke poly dog bone:



Automatic axles, from the previous owners 3.4 swap (unknown mileage):



New in box Isuzu transmission mounts:



Iron Duke PCM and strut tops for making coilovers:



3800 rear exhaust manifold:



3800 front cover:



I have a Turbo Sunfire cluster that I purchased on here for $80. It fell from a shelving unit and cracked the plastic, and I decided to go another route with gauges anyways. Due to the crack, I'll ask $60 + shipping:





Finally I have a 6 cylinder Fiero tach. I installed this in my car and it read incorrectly on the 3800, but I think I might have had the connector a bit loose. Due to the dodgy history I'll sell this one for $10 shipped:



Just make me a reasonable offer on anything posted here. More or less, I'm trying to get this out of my garage.

Do you have the connectors for the sunfire gauge cluster too?

Negative. I only have what's pictured. I understand it's not uncommon to solder directly to the board.

Ok thanks. I'd love to put one of these in my 3800 swap but I'm not interested I'm soldering to the back of the cluster. Finding those connectors would probably be a pain.

Dibs on the Sunbird turbo gauges .... my friend JP need it... let e know shipping to Levis, Quebec, Canada G6V-8P3
thanks

------------------

My Build Thread
Tylers Toy

quote Originally posted by Danyel: Dibs on the Sunbird turbo gauges .... my friend JP need it... let e know shipping to Levis, Quebec, Canada G6V-8P3 thanks

Danyel, does your friend JP live in Jonquiere, QC? He may have PM'd me.

It looks like shipping to QC will be between $25 - 45 USD through USPS.

PMs replied to.

Going through things, I also found a stock shifter that I can offer for sale.

If anyone can use any of this, feel free to make an offer. I'm basically looking for the price of shipping & packaging on the cradle dropout. I'd rather parts go to someone that can use them rather than the scrap yard.

quote Originally posted by GM Shane: Danyel, does your friend JP live in Jonquiere, QC? He may have PM'd me. It looks like shipping to QC will be between $25 - 45 USD through USPS.

yes its me danyel knew that i was looking for a cluster and he is faster than me to look these

how much for the polly engine and trans mounts shipped to 18631

quote Originally posted by 86 toy: how much for the polly engine and trans mounts shipped to 18631

Do you want the stock mounts as well? $32.35 or $27.35 for just the poly, shipped in a flat rate box.

payment for cluster sent check your pm thanks

All parts shipped.

I've started pulling apart the iron duke because I want the floor space back.

Act quickly if you want a part!

Weekend bump.

PM sent

------------------

Project Genisis Lo Budget 3800SC swap

88 Coupe under construction

Are all the poly mounts still availiable?

How much to 60473?

Thanks,
Jason

do you still have the 3800 rear manifold?

------------------
--Mark--
Yellow 88 GT 3400 5speed

Need headers? click here!

do you have the cradle still? if so could you send me a picture please

Ryan

Price for the 2 poly trans mounts and lower engine mount?
Dont need the dogbone or brackets.

PM me please

Wow another 3800 in Michigan

quote Originally posted by 86 toy: do you still have the 3800 rear manifold?

Yes I do. If you're still looking for it. Sorry, I thought this thread was dead.

quote Originally posted by goatvenom: do you have the cradle still? if so could you send me a picture please Ryan

I still have the cradle. It's largely rust free, but could use a good degreasing. I'll get a pic when the sun comes up.

Also the poly mounts are long gone, everyone. Sorry.

[This message has been edited by GM Shane (edited 10-31-2013).]