Hello all I have been working on a project to replace all the decals that you see on your car from front to back. I have accomplished this after a bunch of trial and error. These are direct replacements for what you have in your car. Here is what you get. I will be selling these as complete sets at 35.00 shipped for all decals that you see. I am currently working on the black catalyst decal that is in the back for the 88 v6 cars. I will be working on other years as well. The decals below are all set to size and printed on an eco solvent wave printer. What does this mean. When printed on the vinyl that I use you will be able to wash your decals and not worry about them going away. They are all glossy and with wave technology there will be no lines in the ink so in other words as close to new as you can. The three sets that I have ready to go have the 86 v6 auto and manual catalyst sticker. If you dont mind this then you are all set. I am starting with the three sets that I have made and I have more paper on order for next week to be here to print more.
Here you go 88 decals
added 09 04 2013
9-8-2013 85 decals added
Thank You
------------------ 1986 Fiero GT 1992 Bonneville SSEI 2000 Grand Prix GT FieroNews
[This message has been edited by Fiero Thomas (edited 09-08-2013).]
IP: Logged
07:30 PM
PFF
System Bot
NetCam Member
Posts: 1490 From: Milton, Ontario, Canada Registered: Mar 2012
I am really glad you are doing this for the community. This has been a need for a long time.
I do have a question about the jacking instructions decal. Here is a pic from your other thread:
I have an 85 SE, and it seems to use a different font than the one in your pic. The original decal in my 85 SE does not have top and bottom cross bars on the "I" and it does not have a top cross bar on the "J". I should also have checked the "1" but I forgot to do so.
Was a different font used for the jacking instructions decal for different years?
This photo is from another forum member and is not what I have produced. Mine has the proper font without the slashes that you are referring to. Its as close as your going to get. Here is a photo of mine so you can compare the same section and see that its what you have on your car
Please notice that the lettering is correct on these and they should look this way on your car as well. Good eye but yes that one was not my sticker that was wrong.
Thank You
------------------ 1986 Fiero GT 1992 Bonneville SSEI 2000 Grand Prix GT FieroNews
Originally posted by Fiero Thomas: This photo is from another forum member and is not what I have produced. Mine has the proper font without the slashes that you are referring to. Its as close as your going to get. Here is a photo of mine so you can compare the same section and see that its what you have on your car
Please notice that the lettering is correct on these and they should look this way on your car as well. Good eye but yes that one was not my sticker that was wrong.
Thank You
That is correct; my bad. Since the pic was in your thread I thought you posted it as an example of your work product. My apologies. Your pic above is consistent with the font on my 85 SE original sticker.
IP: Logged
08:33 PM
Aug 28th, 2013
Fiero Thomas Member
Posts: 4669 From: Round Lake Beach, IL Registered: Jul 2005
NIce. I'll take a set for 88 V-6 when you get them done. Will also need a set of the Formula door decals. No hurry, probably wont hit the road this year.
IP: Logged
04:29 PM
PFF
System Bot
Aug 29th, 2013
Fiero Thomas Member
Posts: 4669 From: Round Lake Beach, IL Registered: Jul 2005
