Fieroguru use to make the 13 inch using the fiero calipers without any mods just brackets .... these had a dog bone shape maybe look up this old sale thread ... many are wanting these ... me included. I do have your 12 inch kit but behind 18's they still look small .... let me know .
regards Danyel
I see, he must have used rear rotors from the c5 all around?? The front rotors are way too thick to fit the stock 88 fiero caliper.
. You will also need four M12x1.75 bolts 30mm long. Use grade 10.9 or better. I can provide these bolts if need for another $5, most hardware stores carry them.
Why do we need only 4 boltz instead of 8? What am I missing?
Is the use of the c5 calipers real yet? Loving the rotor upgrade, but with the condition of my calipers I need an upgrade there too.
On an 88, No. Not possible without lots of mods to the caliper mount. The C5 caliper and it's mounting bracket leave no room for an adapter, I've tried.
These brackets are still available, I make them as they are ordered. Lead time of 2 weeks.
I've tried to send a PM twice and have had no response so perhaps I'm doing something wrong. I'm interested in a set of your brake brackets kit. Send info on payment, etcetera. If I understand correctly, all four corners utilize the front rotors from the C4. Hope this goes through.
Sluppy, I'll take one of those sets. Your other brackets I've been using have been great, although I think on the pre-88 cars I've done they have been steel. This will be my first 88 set.
Bump, I have a set available if anyone is interested.
I'm picking up a 88 GT this Sunday for a basic upgrade restore. I'm needing either 12 or 13 inch Brake set up complete four wheels w/Drilled standard rotors> Shipping to 94561.
The two 12" set ups I got before are working great BTW. Good stuff
Yes I have adapters to put c4 rotors and c4 calipers on 84-87 cars, not for the 88's
Well shoot, I am looking for adapters that retain and use the original Fiero calipers. Have used them on two different Formulas and they performed well.
Edited: Maybe I am not communicating this well. It appears you may have precisely what I want based on your first post in this thread.
quote
Originally posted by sluppy123:
These brackets are for 88 fieros. Use the stock calipers and C4 rotors front and rear. You will need the 88-95 front rotors from the corvette. These brackets rotate the caliper up so there are no problems when making a tight turn. 7075 Aluminum, powder coated black. Includes 4 centering rings and 2 left and 2 right brackets along with the required bolts. Also on some cars the lower control arm my rub the rotor, a little work with an angle grinder will fix this. Â
$135 shipped
Rams
[This message has been edited by blackrams (edited 11-12-2018).]
YES, Miss reading on my part. Yes I have several sets in stock that retain the 88 fiero caliper and use the 12" C4 rotor. Just like the picture. PM me if interested!
Sluppy, i ordered these from you forever ago, but I just got around to drilling my rotors. I printed a JIG that uses the corvette bore diameter, and an existing lug hole to space the 5x100 pattern in the middle of the corvette pattern.
and feedback left.
