***With most other projects completed, I will be focusing on this thread. There will be plenty of parts added regularly.***
Trying to get a little more organized so it's time to clear out a few things. Parts are also listed on eBay and more things will be added as I get to them.
NOS Pair of GT Quater Windows - $1000 - Sold '86-'87 Tan Armrests - $20 - $10 - Sold Sluppy123's '84-'87 Rear Caliper Brackets for 12" Corvette Upgrade - $100 - $80 - Sold Brand New Prothane '84-'87 Front Sway Bar End Links - $10 - Sold Aftermarket Center Caps - Never used but have some scuffs from storage - $15 - Sold Fiero Store (I think?) Glove Box '86-'87 Tan (I think) - The OE Fiero style door latch works great. The liner is well worn and could use a replacement, headliner material would be a great, cheap alternative. It has a few minor blemishes on the leading edge and a couple more on the bottom right corner, near where passengers bumper their knee as they enter/exit the car. Mounting hardware is not included, will need four moderately long bolts, nuts, and four oversized washers to distribute the weight - $150 - Sold Mr Mikes Dark Grey Padded Armrest Cover - New, Never Used - $25 - Sold Performance Sound Stereo Wiring Harness - $25 - Sold Manual Mirror Adjustment Bezel - $5 - Sold Rear Window Louver - Sold Used V6 Fuel System - This was removed from a running car several years ago. Includes sending unit, flex lines, two sets of hard lines, and the fuel rail with injectors. The locking tab on the yellow connector on the sending unit broke off while taking the picture as can be seen in the picture - $50 - Sold Used Aero Bumper License Plate Bracket - Has a crack on the top right corner as can be seen in the picture - $25 - Sold Used V6 Valve Covers - $25 - Sold Used Bumper Pads - Pretty sure they're from a GT but not sure if they're fronts or rears - $5 - Sold Used Lug Nut Covers - Set of 5 - $5 - Sold T-Top Conversion - $600 - Sold Rear View Mirror with Metal Mounting Tab - Has some spotting down the center of the mirror, second image shows it a little better - $10 - $5 - Sold Used/Rebuilt '84-'87 Calipers - These were only used for several thousand miles before being swapped out for a 12" Corvette conversion. The fronts were rebuilt with Raybestos kits and the rears were purchased rebuilt from the Fiero Store. They were painted red to add just that little extra bit of stopping power. The brake lines were replaced with Raybestos units at the same time - $100 - Sold
[This message has been edited by hye_4_life (edited 05-27-2020).]
Fiero Store (I think?) Glove Box '86-'87 Tan (I think) - The OE Fiero style door latch works great. The liner is well worn and could use a replacement, headliner material would be a great, cheap alternative. It has a few minor blemishes on the leading edge and a couple more on the bottom right corner, near where passengers bumper their knee as they enter/exit the car. Mounting hardware is not included, will need four moderately long bolts, nuts, and four oversized washers to distribute the weight - $150 - Sold
[This message has been edited by hye_4_life (edited 09-07-2017).]
Mr Mikes Dark Grey Padded Armrest Cover - New, Never Used - $25 - Sold Delivered and installed. Looks perfect, brand new. Thanks for a very pleasant transaction and fast shipping.
------------------ G L Mann Oklahoma City, Oklahoma
T-Top Conversion - Appears to be pretty complete. It's a complete roof from a T-Top car though I'm not sure what year or trim it's from, this was how I bought it. It comes with the glass but no keys for them, it also comes with the bags for the glass as well as a pair of reproduction P seals I'd purchased from FieroParts.com's thread. Unfortunately, I don't have the means to ship this so it will have to be picked up from Fresno, CA - $600
Evidently, I noticed I'd left some plastic trim out of the pictures. I'll take pictures of those and add them later today. Also, it appears I may have the keys after all. I'll confirm that later today as well.
Used '84-'87 Front and Rear Summit Racing Drilled and Slotted Rotors with Front Spindles - The rotors are from Summit Racing and they're their brand. They were only used for several thousand miles before being swapped out for a 12" Corvette conversion. Installing the rear rotors will require the removal of the rear dust shields or bending them to clear the rotors. Front rotors come assembled with spindles but the dust cap is not included - $100
[This message has been edited by hye_4_life (edited 06-29-2019).]
Used/Rebuilt '84-'87 Calipers - These were only used for several thousand miles before being swapped out for a 12" Corvette conversion. The fronts were rebuilt with Raybestos kits and the rears were purchased rebuilt from the Fiero Store. They were painted red to add just that little extra bit of stopping power. The brake lines were replaced with Raybestos units at the same time - $100 - Sold
[This message has been edited by hye_4_life (edited 05-27-2020).]
Used V6 Fuel System - This was removed from a running car several years ago. Includes sending unit, flex lines, two sets of hard lines, and the fuel rail with injectors. The locking tab on the yellow connector on the sending unit broke off while taking the picture as can be seen in the picture - $50 - Sold
[This message has been edited by hye_4_life (edited 07-14-2019).]
