New nose emblems - ready to make, need a final design (Page 3/4)
trivet OCT 31, 08:00 PM
Probably about $16 shipped.

This is for the insert only, adhesive back - no bezel.
trivet NOV 03, 07:11 AM
A couple more - can add color, just wanted to get input on these.
fierofool NOV 03, 08:58 AM

quote
Originally posted by trivet:


It won't be a "true" chrome, no - but it is a glossy finish, so anything silver should reflect well.

What I want is a hybrid of these:




Colors from the top one, new Pegasus design from the bottom. If someone can Photoshop that - PLEASE DO.




How would it look if the red, white and blue lines were brought together with FIERO dropped out?
trivet NOV 03, 10:05 AM

quote
Originally posted by fierofool:
How would it look if the red, white and blue lines were brought together with FIERO dropped out?



Not sure what you mean.......So put "Fiero" and the red/white/blue on top?
fierofool NOV 03, 10:38 AM
Yes. Using the stock Pegasus image, as above, bring the red, white and blue horizontal bands together so there's no space between them. Then put Fiero imposed over those bands in silver or black. Pretty much a stock logo except with the addition of the 3 color bands behind the copy. Same could be done with Fiero GT. All the Fiero nose badges used initial caps with the remainder in lower case rathr than all caps.

Possible legends with any design could be Fiero GT, Fiero SE, Formula or other custom copy, depending upon how hard it is to change your production and how many of each you would need to produce to make it cost effective.

Without reading back through the thread, will these have a clear overlay?

[This message has been edited by fierofool (edited 11-03-2016).]

trivet NOV 03, 12:58 PM

quote
Originally posted by fierofool:
Possible legends with any design could be Fiero GT, Fiero SE, Formula or other custom copy, depending upon how hard it is to change your production and how many of each you would need to produce to make it cost effective.

Without reading back through the thread, will these have a clear overlay?



I need to keep it to 1 or 2 designs max - otherwise the price per piece would not be worth doing. To get decent prices (about $16 shipped) I need to order 100+

And yes, they have a clear overlay - they are not a "flat" decal, but not as thick as the originals are either. Once I have a design finalized, I will have another prototype batch run and send a few out for testing, fit, and review. If satisfactory - I will offer them for sale in the mall.

I prefer the "new" logo, as I am looking to "update" the emblems look. I'll try the 'Fiero' on top of the red/white/blue (w/o spaces) to see how it looks,
qwikgta NOV 03, 06:15 PM
You do realize that the more people you ask, the more "input" you will get. You will not find everyone agreeing on one design. Just pick one and go with it.
trivet NOV 04, 06:34 AM

quote
Originally posted by qwikgta:

You do realize that the more people you ask, the more "input" you will get. You will not find everyone agreeing on one design. Just pick one and go with it.



You make an excellent point

However, I did want some input, as I plan to have a decent size run made to keep costs down. So, I would like to see some interest in what I presented before I spend the money on a large(ish) production run and hope I get back my investment.

But I get your point, I've narrowed it down to a few designs, just working on getting a decent image with good resolution (what I've posted so far is nowhere near the quality I need).

I hope to have a final (or 2) by the weekend - then do one more "prototype" run. I will then send off a few badges to forum members to inspect, test fit, and review. If all goes well, I'll have a large batch made and post in the mall.
trivet NOV 05, 03:15 PM
Ok - these are the designs I'm going with:

New - updated Pegasus (Emblem 1)


And this:

Original Pegasus (Emblem 2)


Should have these ready by next weekend - I'll be starting with Emblem 1, and if there is enough interest, I'll do a run of Emblem #2
trivet NOV 09, 02:32 PM
First production run under way. Posting in The Mall to follow soon.....

[This message has been edited by trivet (edited 11-11-2016).]