quote Originally posted by IMSA GT: Mark, what bumpers did you use?

The top half is the factory bumper cut down. The bottom half is a Honda civic bumper bought new and cut down like 16 times and sectioned together. I had a heart attack 2 years ago and open heart surgery again in May 2021 I am not making any headway. The complete write up is here on Pennocks somewhere. 4.9L custom brakes - delrin suspension bushings. The thing that is not shown is the Rockcrawl hood extractor to remove the air under the hood.

[This message has been edited by Mark A. Klein (edited 08-07-2021).]

I guess I should show off my work here. I grafted a Lexus GS 3000 bumper to the bottom of a gt aero nose.

[This message has been edited by Awalker W02 (edited 08-07-2021).]

Posted a while ago in my build thread...



Bob

------------------

My Build

Mad-Dan nose. 😉

[This message has been edited by exoticse (edited 08-10-2021).]

I did some mods in "Paint"....My car is originally a 1985 SE V6, but after the paint died around 2005 I replaced the upper surfaces with an 87 GT rear and 87-88 base-car nose...I also installed IMSA side scoops and made my own (Aluminum) "B" pillars.

This pic show those mods but also the rub-strip is dipped in the middle making room for a Pontiac Arrowhead.

[This message has been edited by cvxjet (edited 08-11-2021).]