 
     |
| Imsa widebody molds? (Page 1/1) |
|
Phirewire
|
APR 10, 08:58 AM
|
|
|
Anyone happen to know who has or what happened to the Widebody Kits Fiero Fiberglass use to sell?
|
|
|
|
IMSA GT
|
APR 10, 10:35 AM
|
|
|
Contact Sage on here. He was the person who made the parts for Doug back in the day and I believe he has them.
|
|
|
|
infinitewill
|
APR 10, 01:40 PM
|
|
|
I think you are confusing Fiero Fiberglass (that NEVER made IMSA panels) with Fiero Warehouse which is defunct . SageGlassworks owned by Tedd Wilson (who was the fabricator for Fiero Warehouse) is still making parts, I know Tedd is very selective as to what projects he takes on due to his health issues. If you PM him he will fill you in.
|
|
|
|
Quad GT
|
APR 10, 06:52 PM
|
|
|
|
|
Raydar
|
APR 15, 10:49 AM
|
|
| quote | Originally posted by infinitewill:
....
If you PM him he will fill you in. |
|
Good to see you here, Will.
|
|
|
|
Dennis LaGrua
|
APR 21, 03:51 PM
|
|
|
According to Tedd (Sage Glasworks) from another post, Doug from the Fiero warehouse still owns the IMSA widebody molds. If you can locate Doug any number of fiberglass shops should be able to build the body parts. The boat business is big on that stuff ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|
Raydar
|
APR 22, 11:54 AM
|
|
| quote | Originally posted by Dennis LaGrua:
According to Tedd (Sage Glasworks) from another post, Doug from the Fiero warehouse still owns the IMSA widebody molds.
...
|
|
Well... Technically, yeah. Read on.
| quote | Originally posted by Sage:
Doug HAS moved on to other ventures....but he still owns the IRM molds that the parts Fierowarehouse sold were made from.
I, (SageGlassWorks), was always the one who actually made the parts. There have been molds/parts added to the inventory over the years, and those molds are mine,as I made them.
So short version is, I can still make all the fiberglass parts that Fierowarehouse sold, but just on a very "limited" basis, as I have things in my everyday life that take precedence over making car parts.
Hope that clears things up a "little".
...
HAGO!  |
|
[This message has been edited by Raydar (edited 04-22-2021).]
|
|
|
|