Brackets for 13 inch front rotors and corvette calipers for a 1988 (Page 1/2)
coolink13 AUG 28, 09:12 AM
Just as the Title says . That's what I need . I have wilwood corvette calipers and 13 inch corvette rotors I think C5, cant remember? Can't find anyone that makes these? Was hoping someone may chime in with information. 1988 only.
IMSA GT AUG 28, 10:37 AM
Don't know if this helps but Chris has a kit:
http://www.embraceracing.co...erobrakebrackets.php

[This message has been edited by IMSA GT (edited 08-28-2021).]

coolink13 AUG 28, 10:39 AM
Thank you IMSA for the prompt response. I have contacted them with 3 emails as far back as 2 months and no response. I wish they had a phone number.
IMSA GT AUG 28, 11:08 AM
You can try his other website. I'm not sure which one he uses:
https://via-autoworks.my-on...002281_20747110.aspx

Edit.....nevermind, it says NOT for use with 88

[This message has been edited by IMSA GT (edited 08-28-2021).]

sluppy123 AUG 28, 08:21 PM
I make adapters for pre 88 cars that use the 13" c5 rotors and calipers. Unfortunately the 13" c5 rotors will not fit on 88's. The offset is to large and they hit the control arm.
IMSA GT AUG 28, 09:24 PM

quote
Originally posted by sluppy123:

I make adapters for pre 88 cars that use the 13" c5 rotors and calipers. Unfortunately the 13" c5 rotors will not fit on 88's. The offset is to large and they hit the control arm.



You were the first person I was going to recommend but for some reason, I thought you stopped making those.
coolink13 AUG 29, 06:55 AM
Sluppy123, Can the control are be modified slightly to work? I hate to even suggest this,
What about a wheel spacer? I contacted you a while back. Check your messages.
olejoedad AUG 29, 07:23 AM
Fieroguru has 13" brake setup for 88's.

The kit is well done.
coolink13 AUG 29, 07:39 AM
I know about that kit that Fieroguru has. I don't think his kit works with vette calipers. Just the stock Fiero calipers.
sluppy123 AUG 30, 07:57 PM
Fieroguru's kit uses a 13" enclave rotor, it's offset clears the control arms but is to thing to be used with the c5 calipers.

You would need to cut off half the balljoint to clear a 13" c5 rotor on a 88 .