Heater Vent Hose for Iron Duke ThermAC (Page 1/1)
82-T/A [At Work] AUG 11, 01:17 PM
Can anyone tell me what the hose that connects the Iron Duke's ThermAC on the air cleaner with the heat / stove pipe on the exhaust manifold is called? I'm trying to find a replacement hose... and I can't seem to find anything at all that matches it. I'm sure I can get something identical on Amazon easily... but just don't know what it's called. I've tried any number of combinations of terms from this post's subject.


Thanks!!!
fierofool AUG 11, 01:30 PM
It's listed as TUBE, ENG AIR HT STOVE

The GM part number is 10045291.

[This message has been edited by fierofool (edited 08-11-2024).]

fierofool AUG 11, 01:36 PM




That part number is for the flexible hose for the 85. The 84 is different.

[This message has been edited by fierofool (edited 08-11-2024).]

82-T/A [At Work] AUG 11, 06:49 PM

quote
Originally posted by fierofool:

It's listed as TUBE, ENG AIR HT STOVE

The GM part number is 10045291.





Awesome, thank you FieroFool! I found this: https://www.amazon.com/dp/B0BS13HLMG

It's 42mm... about the closest I could find (real measurement is around 40mm interior diameter). So, I'm thinking it should fit. It's about as close as I'm going to get. I'll need to cut it short, but it should work fine. My daughter is using the 88 exhuast manifold, rather than the tube that attaches to the exhaust piping... makes it a bit easier (and shorter length).


Thanks!!!