Aztek - brake lines (Page 1/1) jaskispyder MAY 17, 10:25 AM Anyone replace the brake lines from the ABS module to the rest of the system? I have a bad front line (runs along the firewall, where it is hard to reach), but the others are getting rusty (in spots). I have the one leaking line free from the clips and will probably replace it. The rest look like I need to remove the master cylinder to get to the lines on the ABS module. Of course, there is no room in there to work. I do have an appt with my shop, but I am guessing the price is going to be pretty high because of the location. I am guessing these lines were installed before the engine was in jaskispyder MAY 20, 07:56 AM Looks like the master cylinder will need to come off to get to lines on ABS module. I did fix the one bad line and will replace the others later.