 
     |
| Dew Wipe Replacement (Page 2/10) |
|
jstricker
|
FEB 11, 10:06 AM
|
|
|
Just one bump for the weekend crowd to get it off page 2. John Stricker
|
|
|
|
Wavelength1550
|
FEB 16, 07:58 PM
|
|
|
I set out to do this this evening and saw the screws and said wtf! I knew I would find an answer here. Thank you many times over for going to all this trouble. Daniel
|
|
|
|
ka4nkf
|
FEB 16, 09:18 PM
|
|
Thanks John for the good job. I did mine this way and made the mistake of putting the end screws first, then could not get the middle screw in. So I could see the problem as the middle hole is round and the others are slotted.
Don
|
|
|
|
jstricker
|
FEB 16, 11:48 PM
|
|
You can put the end screws in first, Don, just don't tighten them up! (But I'm guessing you figured that one out on your own, huh?  )John Stricker
| quote | | Originally posted by ka4nkf: Thanks John for the good job. I did mine this way and made the mistake of putting the end screws first, then could not get the middle screw in. So I could see the problem as the middle hole is round and the others are slotted.
Don |
|
|
|
|
|
rubyredfiero
|
FEB 17, 09:01 AM
|
|
|
Excellent "How to..." and a + for you. 
|
|
|
Wavelength1550
|
MAR 06, 07:28 PM
|
|
|
Done. Piece of cake with your help. Thanks again.
|
|
|
|
The Poopsmith
|
MAR 07, 01:35 AM
|
|
|
You can also chisel them out by, if looking at a bolt on its profile you would strike the bolt head not directly on top but a bit to the side causing it to turn then when its loose you can get some needle nose pliers to finish the job. Obviously you would only do this if you were going to replace the bolt anyways.
|
|
|
|
Fiero1Fan
|
MAR 07, 05:11 PM
|
|
|
|
|
carolinajoe
|
APR 01, 04:52 PM
|
|
John
Just wanted to say Thanks for the EXCELLENT Tutorial  Worked out Great only took Half an hour.
|
|
|
Miss-Tress007
|
APR 02, 10:30 PM
|
|
|
Goodness, you read my mind! hehe I'd ordered my new dew wipes before Daytona and had been procrastinating and finding all kinds of excuses why I did not want to tackle this project. LOL Thanks to your excellent "how to" I feel alot better about it. I'll be sure to let you know how it goes once I get to it. hehe (Maybe this week.....  ) ~Tress ------------------
I may not know alot about cars...but I make a Fiero look good! "The Hottie" --drowned by Hurricane Katrina but not forgotten: "Memories are forever"; The Hottie Diaries: (A Tribute to my little car)
Preface: Babes Do It Better Volume I: Checkup Ups and Downs: It Runs, Sort of Volume II: Engine Adventures Volume III: Declaration of Independence ...to be continued (she will live again)
|
|
|
