 
     |
| Getrag axle wobble (Page 2/2) |
|
Larryinkc
|
OCT 09, 12:43 PM
|
|
|
|
|
donuteater306
|
OCT 09, 02:03 PM
|
|
|
Thank you, I’ve never seen those...but I also didn’t know that some wobble is normal. I’m really curious about those Fiero Store support bearings. Looks like a simple (But expensive) solution.
|
|
|
|
donuteater306
|
OCT 09, 02:10 PM
|
|
|
Some how I duplicated a reply. Disregard my previous post. I assumed it was one kit per side, so I had ordered two. Looking at your like the other day, it looks like you only had to modify the one side by cutting notches but the other side was perfect fit. Any idea what size the bolts were that you used in place of the factory ones?
|
|
|
|
Larryinkc
|
OCT 11, 07:30 PM
|
|
The bolt holes in my Getrag did not have any bolts in them, I don;t remember what size I used.
I had to grind two areas on the driver side bearing carrier to clear two raised tabs on the transmission. They are the areas outlined in red.
|
|
|
|
donuteater306
|
OCT 15, 12:53 AM
|
|
|
Both kits arrived. Looks like for the driver's side, you welded two brackets together?
|
|
|
|
Larryinkc
|
OCT 15, 09:34 AM
|
|
|
I did use both brackets welded together on the drivers side to make a more rigid retainer for the stabilizer.
|
|
|
