My digital AR cruise install won't work. (Page 2/2)
fieroguru NOV 02, 10:28 PM
It is only needed when using a OBD2 ecm where the VSS wires go to the ECM first, then send a signal to the speedo. Normal Fiero sends the VSS wires to the speedo, then a buffered signal to the ecm.

hercimer01 NOV 07, 02:17 AM
Thanks everyone. Ive been struggling with this problem. What a nightmare. I jacked the car up to run it so i could troubleshoot it. Whoever did the alignment last left the tie rod clamps clocked inwards so it tore up the CV boot on the axle. I still need to drive the car and swap modules this weekend.

------------------
Project Genisis Lo Budget 3800SC swap SOLD
12.840@104.8 MPH Intense-Racing 1.9 rockers, 3" exhaust, 3.4 pulley, ZZP tune and 18 year old tires.

88 Coupe under construction SOLD

88 formula 3.4L 4t60 swap SOLD

88GT resurrection in progress.