 
     |
| Can I put an 86-88 GT front bumper on my 84 SE? (Page 2/2) |
|
Patrick
|
JAN 02, 10:05 PM
|
|
| quote | Originally posted by ironpuke84:
Could i put an 87/88 fiero formula front and rear bumper on my 84 se (without the facia and stuff)?
|
|
No matter which different "bumper" you swap onto an '84, there's going to some "stuff" required besides the nose itself. A base '87-'88/Formula nose swapped onto an '84 will at least require the specific egg-crate material and air dam. The plastic wheel well liners are also different dependent on which "bumpers" are installed. As mentioned previously by fierosound, it would be best if you were to remove everything you need yourself from a donor car.
|
|
|
|
skywurz
|
JAN 03, 12:16 PM
|
|
87/88 rear bumpers are smooth trim. Watch thatr or it will look funny
You may also need wheel Wells for the front and you need the front blinker spacers when converting to the aero nose.
|
|
|
|
Dennis LaGrua
|
JAN 09, 10:30 AM
|
|
|
The wheel well liners for the GT nose are different. Close to the same wheel liner as on the notch back but with a small added piece stapled in place on the front bottom. The small side trim piece is also different 86-88 but most of the time it stays on the facia when it is removed. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|