|
Project 3400 Roller Cam Block (Page 74/82) |
|
fieroguru
|
MAY 31, 04:28 PM
|
|
quote | Originally posted by lou_dias:
Is this #6 since 2009? I've lost count...
|
|
That almost looks like it wasn't fully torqued.
|
|
|
lou_dias
|
MAY 31, 04:39 PM
|
|
What is the torque setting? I've heard 200# and 100#... But part of the problem is the Arraut bearing isn't "right" where the spline doesn't go 100% thru it due to a spacer that is required...
|
|
|
fieroguru
|
MAY 31, 05:42 PM
|
|
|
|
lou_dias
|
MAY 31, 07:21 PM
|
|
quote | Originally posted by Will: What tires are you running in the front? |
|
Same as in the back just a different brand. Nitto NT01 and Toyo R888[This message has been edited by lou_dias (edited 05-31-2019).]
|
|
|
Will
|
JUN 03, 02:41 PM
|
|
Have you had to work to tame lift-throttle oversteer?
|
|
|
lou_dias
|
JUN 03, 07:15 PM
|
|
quote | Originally posted by Will: Have you had to work to tame lift-throttle oversteer? |
|
I'm using the same HELD kit, slalom front with bump-steer correction in the back except now 13 years later my front "heim" joints are loose as a spruce goose... Alignment is straight. I just play with tire pressures. Lower on the inside, rear is 23 and 28 psi.
|
|
|
La fiera
|
JUN 03, 09:02 PM
|
|
quote | Originally posted by Will:
Have you had to work to tame lift-throttle oversteer? |
|
A locked diff or a tight peg legger like you call it fixes that problem. It also fixes the high speed braking rear wondering of the car.[This message has been edited by La fiera (edited 06-03-2019).]
|
|
|
lou_dias
|
JUN 04, 09:32 AM
|
|
My front end is more of a problem... I need to replace the heim joints that hold the pivot bar of the upper arms... That's the only thing preventing me from hitting turn 3 at WOT right now... Rear end is planted pretty damn good.
|
|
|
La fiera
|
JUN 04, 10:35 PM
|
|
quote | Originally posted by lou_dias:
My front end is more of a problem... I need to replace the heim joints that hold the pivot bar of the upper arms... That's the only thing preventing me from hitting turn 3 at WOT right now... Rear end is planted pretty damn good. |
|
Give the front end a bit of toe-in
|
|
|
lou_dias
|
JUN 24, 07:43 PM
|
|
Couldn't launch the car on Saturday.
You can see my nose bounce on both launches. I think I under-revved the launch... My tach has been inaccurate for years.
|
|
|