|
Manual Transmission Identification With Pics (Page 1/14) |
|
buddycraigg
|
JUN 05, 11:43 PM
|
|
manual tranny id The Muncie 4 speed. Only has 2 pieces to it’s case so it does NOT have an end cap.
The cables run over the top side by side.
The cables are held in this bracket and use two spring metal clips in the shape of a “U” to hold them in place
The 84 4 speed case has brackets for cables used in FWD cars cast in to it's case.
The 85 and up case does not have the cable brackets.
The 84 case is smooth.
The 85 and up case has fins cast in it to make it stronger.
[This message has been edited by buddycraigg (edited 11-03-2005).]
|
|
|
buddycraigg
|
JUN 05, 11:45 PM
|
|
The Isuzu 5 speed Has three pieces to it’s case and has a large aluminum end cap.
The cables run over the top side by side.
The cables are held in this bracket that has a single bolt running through the center of it.
It has a reverse light switch on the top next to three large bolts.
|
|
|
buddycraigg
|
JUN 05, 11:47 PM
|
|
The Getrag 5 speed Has three pieces to it’s case and has a flat IRON end plate. (you can check it with a magnet)
The cables run one over the top
and one from the bottom.
* * * thanks to rubyredfiero for the pic* * * The top cable is held in place by this bracket
It has a reverse light switch above three tube like humps.
[This message has been edited by buddycraigg (edited 06-07-2005).]
|
|
|
lurker
|
JUN 06, 01:19 AM
|
|
excellent post, buggycraidd oops, dyslexic moment, sorry. i'll leave it for grins. [This message has been edited by lurker (edited 06-06-2005).]
|
|
|
rims05
|
JUN 06, 01:33 AM
|
|
nice, this just might be the end of the "tell me what transmission i have" threads lol, always like to see info before its asked for that means you know what your doing Travis
|
|
|
jelly2m8
|
JUN 06, 02:02 AM
|
|
Excellent post buddy, this one needs to be stuck in a faq.
|
|
|
buddycraigg
|
JUN 06, 02:05 AM
|
|
quote | Originally posted by lurker: excellent post, buggycraidd |
|
mmmm double D's i can only wish... at least you got two Gs in there somewhere [This message has been edited by buddycraigg (edited 06-06-2005).]
|
|
|
HellYes
|
JUN 06, 02:22 AM
|
|
|
|
1MohrFiero
|
JUN 06, 07:14 AM
|
|
|
|
buddycraigg
|
JUN 06, 07:24 AM
|
|
quote | Originally posted by 1MohrFiero: my 87 GT trans looks more like a getrag than an isuzu and has a metal plate but the dipstick is located about wher the connector hangs in this picture.So is this an early gertrag or later one? Thanks, |
|
a 86 and up GT would have had a getrag in it so thats why it looks like one. and I never have been able to make any sence out of the whole dip stick thing, some had em, some didn't (that's why i didn't mention it) but thanks for bringing it up. [This message has been edited by buddycraigg (edited 06-06-2005).]
|
|
|