|
Quad 4 swap (lot of pics) (Page 1/31) |
|
sardonyx247
|
JUN 19, 04:54 AM
|
|
|
|
sardonyx247
|
JUN 19, 05:05 AM
|
|
Did I mention I have TONS of pics.
The engine mounts
The Slave adapter.
The modified T-stat housing
More engine pics
The transmission clearance. (or lack there of )
Solid cradle mounts.
A few different engine covers I have.
More pics later, need to sleep
|
|
|
carbon
|
JUN 19, 10:43 AM
|
|
Love those manifolds, intake and exhaust... some engineer was really proud of those castings.
|
|
|
Stubby79
|
JUN 19, 12:00 PM
|
|
quote | Originally posted by carbon:
Love those manifolds, intake and exhaust... some engineer was really proud of those castings. |
|
I'm with you. That's some nice engine pr0n!
Such a tiny engine for what it can do.
|
|
|
Dennis LaGrua
|
JUN 19, 12:17 PM
|
|
I knew a guy who had a quad four Fiero but I never rode in it. He reported that the power band down low felt exactly like his Duke but as soon as the revs hit 3000 RPM the power came on fast. I don't believe that he was getting better gas mileage than a Duke a something like 35 hwy mpg. I've heard of Duke owners with the 5 speed Isuzu's getting 39 to 40 hwy mpg. Good luck with the swap. ------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Powerlog manifold, Northstar TB, LS1 MAF, 3" Flotech Afterburner Exhaust, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE "
|
|
|
ericjon262
|
JUN 19, 12:29 PM
|
|
Loving it! keep up with the pics! nice to see another swap that's not a 3800!! ------------------ there's a Group on 60degreeV6.com for us 660 Fiero owners!
Fiero Owner's group on 60degreeV6.com
I know these lines Look crooked on paper, but I swear I've got them straight in my head.
|
|
|
sardonyx247
|
JUN 19, 04:51 PM
|
|
Time for more pics.
More pics before dissambly.
Exhaust, I don't know if I will use it as it is LOUD. Not that I mind loud but I allready have a loud Fiero.
What a great stock manifold.
Water pump is tucked in there good.
This coolent pipe ws moddified for the 84', I will just use a stock un modded one for the 87' as the heater return ties into the coolent pipe on 87's
Broken wire on the alt I need to fix.
A/C compressor, I will have to make up new A/C lines as you can see the oil filter is in the way of useing stock Fiero lines.
Engine grounds.
The starter is also tucked in there, but at least it is on the intake side.
|
|
|
sardonyx247
|
JUN 19, 05:29 PM
|
|
More pics of the mounts.
A couple more pics of the solid cradle.
The tensioner bracket.
|
|
|
sardonyx247
|
JUN 19, 06:25 PM
|
|
Pics of the throttle body, this is not a stock Quad 4 TB, it is a 3.4 DOHC TB
The adapter, with matched bored out intake.
Gasket for it.
Linkage adapter.
Water pump.
|
|
|
sardonyx247
|
JUN 19, 07:20 PM
|
|
The stock double rollor timming chain. What a great thing. and cam gears.
The chain tensioner.
The block.
Time to go work on it some more, will post more pics later. I'm sure your ISP (Internet Service Provider) hates you by now anyway I have alot more pics and more to take too, stay tuned.
|
|
|
|