3800 sc vacuum routing (Page 1/1)
vette7584 APR 05, 09:18 AM
doing a 3800sc swap, any suggestions for vacuum routing? eliminate "tee" on top of housing? where do all the lines run to?
Mike Gonzalez APR 05, 09:34 AM
All that is ever left on mine is the brake booster line off the TB, And from under the SC snout go to the MAP, and Tee to the FB regulator.
Riddick85 APR 05, 11:42 AM
I agree with mike. Run a line to booster from throttle body. Fuel pressure regulator and Map off same line. Make sure you block off the vacuum tree on supercharger well, don't want a vacuum leak.
vette7584 APR 05, 07:21 PM
thanks guys!
longjonsilver APR 09, 07:20 AM
i get all kinds of conflicting advice here about the vacuum routing on the 3800 SC - L67. My car is all stock manual transmission with all sensors. The advice doesn't agree. Here are two differing diagrams:

screen capture



and from another thread:



And then another guy says i need to use the hard plastic lines rather than rubber hose.

What should i believe?

------------------
Astronomy says we will find a coded signal from outer space. Then we'll KNOW that life exists there, for coded signals aren't by chance.

Biology says there are coded genetic signals in every cell, but we KNOW that no intelligence created life.

I'm the original owner of a white ' 84 2M4 purchased Dec 10, 1983 from Pontiac. Always garaged, no rust, 4-wheel drifts are fun!