I recently purchased my first Fiero and I am in the process of changing my brake pads and when I went to put the calipers back on it was nearly impossible. I had to hammer the front's on and the rears are just as hard except the piston side pad keeps coming loose from the retention clip. I even purchased new calipers for the rear and am still having troubles. I also bought new rotors and they are the same thickness as the old ones. Am I doing something wrong here? I've changed brakes many times on other vehicles and have never had this issue. Any advice or insight is appreciated.
Thanks,
Bob
theogre
OCT 14, 05:36 AM
The Rear Pistons should retract so piston is < 5mm, 3/16in, high. Think Front are about same. Side effect piston boots are flat too not "cone shape."
------------------ Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should. (Jurassic Park)