|
3800sc 4 speed swap finished ๐ (Page 1/1) |
|
pontiacfierokid1985
|
JAN 03, 03:47 AM
|
|
Soooo I finally been finished with my swap been driving it for the past 2 months now. Now looking to do some minor things. 1st short throw shifter which Rodney shifter is best and sporty looking in the fiero console (4 speed Muncie). 2nd keeping the front compartment down while getting into the throttle or high speeds. The front end is really light should i vent the front deck lid and if so how do you all do yours. 3rd rims I know the fiero used 5x100 lug pattern which rims will bolt up I was thinking of getting newer 2015+ Scion tC wheels really dig those a lot since they kind of look like c7 grand sport rims ๐
Well fill your answers below everyone sorry I been away for a bit just been enjoying the car now that it finally has the motor it should of had from day 1 lol
|
|
|
Frenchrafe
|
JAN 03, 06:02 AM
|
|
|
|
DimeMachine
|
JAN 03, 10:57 AM
|
|
Nice- Enjoy!
Tire Rack has a good selection of 16 and 17" rims . Personally I wouldn't go much bigger than 17" rims on the fiero. Good luck!------------------ 84/87 NB, 3800SC, E-85, VS Cam, 2.8 Pulley, 4T65E-HD, HP Tuners, AEM Wideband, Regal GS Gauges, S-10 Brake Booster. 1/4 mile -11.85 at 114mph
|
|
|
ragoldsmith
|
JAN 03, 12:11 PM
|
|
Nice, that 3800 must feel great! I just finished installing Rodneyโs competition short throw shifter along with a weighted Mishimoto shift knob. I love the feel of both of them. I also have 18โ Scion tC wheels (installed by the previous owner). You can see both in my build threads below.
http://www.fiero.nl/forum/Forum1/HTML/099612.html
|
|
|
pontiacfierokid1985
|
JAN 03, 06:32 PM
|
|
Do you still have this shifter if so do you wanna make a few bucks ????
quote | Originally posted by ragoldsmith:
Nice, that 3800 must feel great! I just finished installing Rodneyโs competition short throw shifter along with a weighted Mishimoto shift knob. I love the feel of both of them. I also have 18โ Scion tC wheels (installed by the previous owner). You can see both in my build threads below.
http://www.fiero.nl/forum/Forum1/HTML/099612.html |
|
|
|
|
sourmash
|
JAN 03, 07:00 PM
|
|
I've got these for $200. 17x7. There's 5 because one has a small crack that could be repaired.
|
|
|
pontiacfierokid1985
|
JAN 03, 09:29 PM
|
|
Is the center already milled out to fit tight on the fiero hub
quote | Originally posted by sourmash:
I've got these for $200. 17x7. There's 5 because one has a small crack that could be repaired.
|
|
|
|
|