Door side window (Page 1/1)
Lord Kebson MAR 28, 06:42 AM
Hi, there. I need to replace my door window. Can anyone please tell me if all Fieros have the same door window?
My Fiero is a 1988 GT

Thanks
olejoedad MAR 28, 02:30 PM
Yes, all glass in the Fiero is the same, side, rear and windshield.

HOWEVER, the tinting in replacement glass does not come close to matching the original.
reinhart MAR 29, 09:26 AM

quote
Originally posted by olejoedad:

Yes, all glass in the Fiero is the same, side, rear and windshield.

HOWEVER, the tinting in replacement glass does not come close to matching the original.



Who sells new side glass?
Lord Kebson MAR 29, 09:49 AM
Thank you,
I'm buying a used one, I just wanted to confirm that there were no changes in size over the years.

Super, thanks again.
reinhart MAR 30, 06:58 AM

quote
Originally posted by Lord Kebson:

Thank you,
I'm buying a used one, I just wanted to confirm that there were no changes in size over the years.

Super, thanks again.



Yes. I was replying to Joe's comment that the new side window tints don't match.
Dennis LaGrua MAR 31, 09:12 PM
If you are looking to replace the door glass be prepared for a difficult job. I've done the job and don't wish to do it again. The lock plate, latch lever, and inner door panel need to be removed eith the inner dew wipe. Then the window stops (both on and off the window) and door glides need to be removed . The door stops on the window uses a rivet that needs to be drilled out. Finally the rear window channel need to come out so that the window can be pulled up and out. Working in such a cramped work environment I even decided to remove the door outer skin for better access. Allow a few hours time to get this job done.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

IMSA GT MAR 31, 09:34 PM

quote
Originally posted by Dennis LaGrua:

If you are looking to replace the door glass be prepared for a difficult job. I've done the job and don't wish to do it again. The lock plate, latch lever, and inner door panel need to be removed eith the inner dew wipe. Then the window stops (both on and off the window) and door glides need to be removed . The door stops on the window uses a rivet that needs to be drilled out. Finally the rear window channel need to come out so that the window can be pulled up and out. Working in such a cramped work environment I even decided to remove the door outer skin for better access. Allow a few hours time to get this job done.




Hey, he's Polish just like me. After a bottle of Slivovitz, we do our best work