|
3800 NA Belt size and routing Help (Page 1/1) |
|
Jasperr
|
APR 10, 01:59 PM
|
|
My set up is a 3800NA, with the stock alternator location, no power steering, and an AC delete pully.
From browsing the forums I came up with two potential belt part #'s and two potential routing options. Both of which I've been met with no success. One is a Continental 4060850 (85 inches), and the other is Dayco 5060835 (83.50 inches).
Here are the two routing options I came across:
In the case of option B, both belts were a fair bit too small to even get on. In option A, the Continental belt fits but rubs against itself where I drew the red X. The Dayco belt does not fit this route.
Anyone here with a matching set up who could tell me what belt they used? Really don't want to just blindly buy belts till I find it.
|
|
|
MulletproofMonk
|
APR 24, 11:45 PM
|
|
|
|
Alibi
|
APR 25, 03:57 PM
|
|
Whoever did mine (98 SII NA) did it the same way but I'm going with a low mount alt soon so I can replace my notched and now warped decklid. My setup used an ac delete pulley, no power steering, and a flat idler pulley that should be swapped for a ribbed one.
Let me zoom in and see if I can get the belt number. If these don't get you there I can get better pictures when I get home.
|
|
|
Alibi
|
APR 25, 04:01 PM
|
|
Here we go: Gates K060785
|
|
|
|