Question about shifter select cable routing (Page 1/1)
Benn2002 APR 12, 10:37 PM
Hey guys, quick question here, I just ordered rodney's select cable the other day and I installed it and it's still quite hard to push to go over to 1&2 and 5&R. I am wondering (since there is a pretty tight bend where it goes over the crossover pipe) is it supposed to go BELOW the crossover pipe? Because I put it over it, the heat insulation on the cable is being squeezed between the pipe and the cable. Thank you!!
Patrick APR 12, 10:49 PM

There's a diagram that's been posted here many times over the years that shows the correct routing of the cables. If you can't find it using the Search function, perhaps someone will post it here again.
Benn2002 APR 13, 12:05 AM
I am aware of that picture, it doesn't have the corssoverpipe even labeled or on that diagram.
fierosound APR 13, 01:55 AM

quote
Originally posted by Benn2002:

I am aware of that picture, it doesn't have the crossoverpipe even labeled or on that diagram.



Shift cable goes over the crossover pipe, not select cable.
Select cable goes between firewall and heat shield and down to side of exhaust downpipe as shown.



------------------
My World of Wheels Winners (Click on links below)

3.4L Supercharged 87 GT and Super Duty 4 Indy #163

[This message has been edited by fierosound (edited 04-13-2021).]

Patrick APR 13, 02:29 AM

That diagram looks very familiar.