PCM Programing (Page 1/1)
Jlife JUN 11, 11:16 PM
Anyone currently programming 3800sc PCM's------Thanks
longjonsilver JUN 12, 02:02 PM
Ryan Gick just did a good job on mine. Plus service after the installation.
jon

http://www.gmtuners.com/fiero/

[This message has been edited by longjonsilver (edited 06-12-2021).]

Dennis LaGrua JUN 12, 06:18 PM

quote
Originally posted by longjonsilver:

Ryan Gick just did a good job on mine. Plus service after the installation.
jon

http://www.gmtuners.com/fiero/




Just so everyone knows. Ryan Gick is a crook that screwed me out of a trade deal. I cannot recommend him as a source. I sent him some prom carriers about $200 worth and he was supposed to just do a simple task and check over my 4.9L program but after many requests he never replied or did anything for his end f the deal. . The man is unethical to say the least. I hope that he is reading this.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

Tony Santucci JUN 13, 12:40 PM
Might want to check with Northstar Performance. northstarperformance.com. He is set up to do just about every PCM 1996 and up at this point. Tell him I sent you.