 
     |
| F23/3800 SC- Consensus on clutch ? (Page 1/1) |
|
cam-a-lot
|
JUN 13, 07:22 PM
|
|
Hello folks
Any input on what brand of clutch you have used for this combo? I believe I need to get a spacer to prevent the HTOB from over extending, but what has been a successful clutch for this trans/engine combo?
I have been running a Spec 3 behind my 282 Getrag/3800 SC for a number of years and have been happy with it.
Any reason to switch? I believe my fywheel is fine- don't seem to have any issues with it
thanks
|
|
|
|
jb1
|
JUN 13, 08:27 PM
|
|
|
Using 3+ on a current build.. haven't got to.point of installing flywheel etc.
|
|
|
|
Will
|
JUN 14, 01:05 PM
|
|
|
Some older clutches have slight interference with the F23 bellhousing... so check that out. Otherwise, I haven't heard of a reason you wouldn't be able to keep running the same clutch.
|
|
|
|
cam-a-lot
|
JUN 18, 10:13 PM
|
|
|
|
|
Will
|
JUN 19, 08:15 AM
|
|
| quote | Originally posted by cam-a-lot:
Any other input on this? |
|
Do a test fit of the trans, torque the bellhousing bolts, then roll the engine over by hand. If you have problems, then you have the pressure plate cover/bellhousing interference issue.
I assume you've researched the F23 swap and are comfortable with all the other needs.
|
|
|
