Injector Harness C Clips (Page 1/1) SemperFi18 JUL 11, 04:48 PM Hey guys, ran into a little snag as I'm putting the rebuilt 3.1 back together. Hoping you can point me in the right direction. A few broke, some flew across the garage during removal.. I'm down to 1 of those retainer clips that hold the injector harness to the top of the injector. Not the ones that hold the injector to the rail, but the harness to the injector. I can't find them anywhere and can't get this $3k restore up and running due to two dollars worth of clips.. any help would be appreciated. 86 2M6 3.1 pmbrunelle JUL 11, 04:53 PM The injector connector is standard. You can go junkyard hunting for similar connectors, and presumably take the wire clips from them. Otherwise, you can search online for the following keywords: Bosch Jetronic EV1 Minitimer SemperFi18 JUL 11, 05:12 PM quote Originally posted by pmbrunelle: The injector connector is standard. You can go junkyard hunting for similar connectors, and presumably take the wire clips from them. Otherwise, you can search online for the following keywords: Bosch Jetronic EV1 Minitimer You're the man, thank you! For the life of me I couldn't find these exact ones. There's a cheap set of the connectors themselves on Amazon for 12 bucks.. steep price since I'll only need the clips. But saves me a trip to the junkyard. Thanks again for the quick helpful answer SemperFi18 JUL 11, 05:13 PM quote Originally posted by pmbrunelle: The injector connector is standard. You can go junkyard hunting for similar connectors, and presumably take the wire clips from them. Otherwise, you can search online for the following keywords: Bosch Jetronic EV1 Minitimer You're the man, thank you! For the life of me I couldn't find these exact ones. There's a cheap set of the connectors themselves on Amazon for 12 bucks.. steep price since I'll only need the clips. But saves me a trip to the junkyard. Thanks again for the quick helpful answer