Is SMC compatible filler acceptable for use on the roof and front hood? (Page 1/1) imacflier JUL 26, 10:48 PM Hi, All, Well this time the title completely describes my question. However, as an "Oh, bye the way....", if anyone has looked at the prices and quantities available for the SMC filler such as Evercoat ($66/qt) I found this stuff on Amazon for only $10 for 8oz: https://www.amazon.com/gp/p...00_s00?ie=UTF8&psc=1 A cup is certainly enough for my needs....I will let y'all know how it works! TIA, Larry RWDPLZ JUL 26, 11:23 PM Not familiar with that product, but I used Evercoat Fiber Tech on the decklid with excellent results (same SMC material as the hood and roof), a cheaper alternative would be nice. https://www.fiero.nl/forum/Forum2/HTML/103013.html IMSA GT JUL 27, 12:14 AM quote Originally posted by imacflier: Hi, All, Well this time the title completely describes my question. However, as an "Oh, bye the way....", if anyone has looked at the prices and quantities available for the SMC filler such as Evercoat ($66/qt) I found this stuff on Amazon for only $10 for 8oz: https://www.amazon.com/gp/p...00_s00?ie=UTF8&psc=1 A cup is certainly enough for my needs....I will let y'all know how it works! TIA, Larry Larry, that will work just fine. U.S Chemical has been making great products for over 50 years and they have excellent prices. imacflier JUL 27, 06:34 AM Thanks, Guys, I was pretty sure it was the right stuff, better to check twice than rinse and repeat! Later this morning: my prep procedure and my request for comments. Thanks again, Larry creaky78 JUL 29, 01:54 PM I used the SMC 77702 to repair roof cracks at the upper corners of the windshield and above the rear view mirror, worked great.