|
Seat brackets & rails (Page 1/1) |
|
The_Q42
|
AUG 09, 03:35 PM
|
|
Hello!
I've just ordered some Mr. Mike's seat kits, and I'm pumped, but my brackets/rails are very, very rusty. I'm planning on trying to refurb them, but in case I can't, is there good replacement hardware out there for the rails (so I can still slide the seats fwd and back) and brackets? I was surprised it's not an available part on the Fiero Store . . .
(I did run a search, but didn't find all the info I was hoping for--sorry if this is a repeat topic)
Thanks![This message has been edited by The_Q42 (edited 08-09-2021).]
|
|
|
hnthomps
|
AUG 16, 09:41 AM
|
|
quote | Originally posted by The_Q42:
Hello!
I've just ordered some Mr. Mike's seat kits, and I'm pumped, but my brackets/rails are very, very rusty. I'm planning on trying to refurb them, but in case I can't, is there good replacement hardware out there for the rails (so I can still slide the seats fwd and back) and brackets? I was surprised it's not an available part on the Fiero Store . . .
(I did run a search, but didn't find all the info I was hoping for--sorry if this is a repeat topic)
Thanks!
|
|
I have one good spare seat rail/bracket that is not attached to a seat. I do not remember which side it is for but can figure it out if I take a good look at it.
Nelson
|
|
|
wilberto
|
AUG 19, 09:00 AM
|
|
I just went through the same thing. I ordered Mr. Mikes as well. I used a small wire brush with acetone to clean it. . I bomb canned it black and then lubed everything with WD 40. Like new!
|
|
|
|