 
     |
| How close is this to the Fiero interior door? (Page 1/1) |
|
Wichita
|
AUG 14, 03:38 PM
|
|
Just curious if anyone has tried to match this door interior up with the Fiero door interior. Delete the automatic seatbelts of course.
1990 Grand AM
 [This message has been edited by Wichita (edited 08-14-2021).]
|
|
|
|
IMSA GT
|
AUG 14, 04:34 PM
|
|
|
I'll only guess and say it's too long. The height may work but the length is way off.
|
|
|
|
fierofool
|
AUG 14, 09:51 PM
|
|
|
Looks like the door panel from the sorry-ass Beretta my wife had. Couldn't keep that door pocket attached to the door. They were constantly being replaced by the dealer.
|
|
|
|
edfiero
|
AUG 19, 07:37 AM
|
|
Although style is the same, its not even close to being a replacement.
the Fiero door has a slight angle on the left side. This one not so much. And on the right side top the Fiero door has a sharp (35-40 degree) angle to it, while this door is almost straight.
|
|
|
|
Dennis LaGrua
|
AUG 19, 09:02 AM
|
|
|
I have seen Fiero's with different dash and door panels from other vehicles but don't recall what they were from. They most likely required modification to fit but they looked good. The one shown here looks as though it cannot be cut to fit. ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|