 
     |
| INCOMING AIR TEMP CONNECTOR (Page 1/1) |
|
eti engineer
|
AUG 22, 09:18 PM
|
|
I'm still awaiting my transmission mounts to finish up the work in the cradle, but they are supposed to be here tomorrow. In the meantime, another issue has developed. There is an incoming air temp sensor mounted to the side of the air filter housing. I figured that when I put the wiring harness back on the engine, it would be there for me to hook up. Well, I have the harness completely installed and there are no connectors left to hook up. So can anyone tell me where the connector and wiring for this sensor come from? Is it from a different spot and not from the main wiring harness? This is the only thing I know of that I can't account for at the moment. See photos below. Any help is appreciated, because I am sure the ECM is going to be looking for an input from this.
|
|
|
|
skywurz
|
AUG 22, 09:23 PM
|
|
That one comes from the tail light harness. That's the same harness that hooks to the Cruse control. It should be popping in on the drivers side by the 1/4 window.
|
|
|
|
eti engineer
|
AUG 22, 09:40 PM
|
|
| quote | Originally posted by skywurz:
That one comes from the tail light harness. That's the same harness that hooks to the Cruse control. It should be popping in on the drivers side by the 1/4 window. |
|
Thanks. I will have to look harder then. It was probably staring me in the face. I couldn't see it being a part of the engine harness because it should go directly to the ECM, one would think. I will check it out. I appreciate the help. This forum is great and guys like you are the reason why. Have a good evening...
|
|
|
|
fierosound
|
AUG 24, 12:39 AM
|
|
|
|
|
skywurz
|
AUG 24, 02:00 PM
|
|
Ah yeah Sound is right
While that cable should land in that area i was wrong its not on the tail light harness it should be on that engine harness somewhere....
|
|
|
