 
     |
| Cradle (Page 1/1) |
|
Johan
|
AUG 29, 01:28 PM
|
|
Hi
Have done a engine swap and wonder if I can use an ironduke cradle for a v6 engine? If so what engine mount do I use?
Regards
Johan
|
|
|
|
IMSA GT
|
AUG 29, 03:06 PM
|
|
|
If I remember correctly the only cradle that is a direct swap would be an 85 cradle. You cannot use an 84 cradle and the 86-87 will require some work. I'll let someone else chime in who is more certain.
|
|
|
|
Johan
|
AUG 30, 03:53 PM
|
|
Thanks for the info.
Johan
|
|
|
|
Dennis LaGrua
|
AUG 30, 08:48 PM
|
|
|
A 4 cyl cradle can be used to mount a V6 engine. It is not a direct bolt in job and it will fit, but you will have to weld new mount points to it and drill some holes. In other words it becomes a fabrication job ------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "
|
|
|
|