If you're in a state that has the cursed front license plate law, you're in luck.

Long story short, my buddy decided to replace the front bumper on his 2015 Charger and didn't want to re-install the permanent unsightly license plate bracket on it so he bought an aftermarket one that has a quick release option to remove the plate which mounts to the bottom of the bumper. I helped him install it, but before I did I played around and found that it would actually work on our cars too (at least the ones with a GT bumper), with only a slight modification to the plate bracket, drilling one of the mount holes closer on center.

It's a STO N SHO Front License Plate Bracket for a 2015-2020 Dodge Charger.

https://www.amazon.com/gp/p...00_s00?ie=UTF8&psc=1









You can see the bolt on the back that is crooked, that's the one I had to drill to make it mout with all three bolts to the bumper. It's mounted on there solid, though I plan on replacing the mounting bolts with ones that actually secure it to the bumper with a nut and bolt rather than the included plastic self tapping screw bolts. They feel like they will strip if tightened too much since the bumper is kinda on the thin side on the bottom.

All in all, I'm happy with it! The plate is removable for shows, and the bracket you install on the car is barely visible when you're standing up normally looking at the car. To remove the plate, simply pull on that keyring looking thing and then pull the plate out.

Hope this comes in handy to somebody looking for a front plate mount solution! 😊

------------------
"Discord"
Red 1988 GT under restoration!

Let's Go Mets!

( ͡° ͜ʖ ͡°)

[This message has been edited by Shho13 (edited 09-25-2021).]

[This message has been edited by Shho13 (edited 09-26-2021).]

I think most of us would agree the front license is a problem and it detracts from the look.

I made a miniature steel tubing sleeve hitch receptacle that attaches to the crosswise front frame and then comes out just under the nose of the car. From there, I used 1/2" square aluminum tubing to reach the passenger side. The design allows me to have the plate either in the center of the car or either side. Like a trailer sleeve hitch, it releases with just one pin and a locking clip. No holes were made in nose section.

I can adjust the plate up or down with no tools.

If anyone is interested I'd be glad to post more photos.




------------------
88GT 355 CI, AED HO 750 Double Pumper, AFR milled 180, Dyno'd at 427 HP, 360 WHP, F40 6-Spd
anderson@gdsconsulting.com

[This message has been edited by V8Steve (edited 09-27-2021).]

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

quote Originally posted by Mickey_Moose: The thing is, there is a factory front location - most people just remove the mount.

I've experienced no problems with the off center license plate mounting with the retractable bracket here in NJ. If there is a law for center mounting it is not strictly enforced. Also any car 25 years (or older) or one registered as a "collector car" does not require state inspection.

------------------
" THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite.
"THE COLUSSUS"
87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H
" ON THE LOOSE WITHOUT THE JUICE "

quote Originally posted by Mickey_Moose: The thing is, there is a factory front location - most people just remove the mount.

damn, never knew that. I guess the cops just dont care near where I live then

[This message has been edited by Xenoblast (edited 09-28-2021).]