Cradle rear bushing replacement Question (Page 1/1) str8maxn NOV 15, 11:06 AM I am in the process of replace the Rear Cradle pushing closest to the trunk. The engine is still in the car. I am able to lower the cradle about 3-4 inches but the lower half of the bushing is rusted in place. I soaked it with PB Blaster over night. Is there a way to remove it without knock it out from the top? I was thinking of using a socket and the stock bolt to push it out. Will this work? Gall757 NOV 15, 09:07 PM PB blaster for a week might be necessary, and you could get lucky.