|
Mode & Recirc door actuator electrical connectors (Page 1/1) |
|
Jalisurr
|
FEB 22, 02:10 PM
|
|
I'm working on retrofitting a new A/C system into a Fiero that originally came without (along with an engine swap - story for another thread). I've got the A/C HVAC box installed, the push-button controller in, front compartment wiring sorted, all good. My issue is the used HVAC box I picked up didn't come with the electrical connectors for the door actuators. I have the connector and pigtail for the controller, the wiring diagram etc so I can build the harness but I can't seem to find a source for those dang connectors anywhere.
Does anybody know if there is a place to buy replacement connectors? Alternatively, anybody have a parts car with A/C that I can snag connectors off of?
|
|
|
theogre
|
FEB 22, 05:58 PM
|
|
See my Cave, Heat & AC
------------------ Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should. (Jurassic Park)
The Ogre's Fiero Cave
|
|
|
Jalisurr
|
FEB 22, 07:07 PM
|
|
quote | Originally posted by theogre:
See my Cave, Heat & AC
|
|
Thanks! I've seen your breakdown of the wiring and it's very handy. I'm confident I know what wire needs to go where, it's just the actual physical electrical connectors that I need (I don't have the wiring harness for an A/C car). The pins on the actuators look like they'd be a pain to wire to without having the intended connector. I have the connector and pigtail for the pushbutton controller and I've tested that the actuators work by jumping them to the appropriate pins.
I was hoping the connectors might be a common form factor but I can't seem to find any info on them.
|
|
|
|