|
86 4cyl with AC coolant hoses (Page 1/1) |
|
Miker
|
MAR 15, 01:56 PM
|
|
I'm trying to find a replacement for the coolant hose that runs from the water pump to the pipe on the passenger side rear.
As per title its an 86 4cyl with AC.
I last bought one (years ago) from the Fiero Store but the listing doesn't seem to be there any longer.
Any ideas for a replacement?
|
|
|
theogre
|
MAR 15, 03:19 PM
|
|
They make flex hoses for this reason. Can find straight, 90° on 1 end and likely others. ------------------ Dr. Ian Malcolm: Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should. (Jurassic Park)
The Ogre's Fiero Cave
|
|
|
Dennis LaGrua
|
MAR 15, 04:30 PM
|
|
Take the hose down to your local auto parts store and match it up. The store in my area lets me go back where the hoses are and I match it up best that I can. I always seem to find an equivalent or something that I can cut to fit. Just be careful to check the hose ID. Also check out Rock Auto that has quite a few hoses listed
------------------ " THE BLACK PARALYZER" -87GT 3800SC Series III engine, custom ZZP /Frozen Boost Intercooler setup, 3.4" Pulley, Northstar TB, LS1 MAF, 3" Spintech/Hedman Exhaust, P-log Manifold, Autolite 104's, MSD wires, Custom CAI, 4T65eHD w. custom axles, Champion Radiator, S10 Brake Booster, HP Tuners VCM Suite. "THE COLUSSUS" 87GT - ALL OUT 3.4L Turbocharged engine, Garrett Hybrid Turbo, MSD ign., modified TH125H " ON THE LOOSE WITHOUT THE JUICE " [This message has been edited by Dennis LaGrua (edited 03-15-2022).]
|
|
|
Miker
|
MAR 16, 07:49 AM
|
|
I didn't know they made a flex hose with a 90 bend. Thanks for the education.
I think I'll try one of those as the hose I got from the Fiero Store was a struggle to get on and didn't seem to fit correctly after it was on.
I'm not sure the car had an EOM hose when I bought it and I replaced all the hoses with ones from the Fiero Store shortly after I bought it as I didn't know the age of the existing hoses.
|
|
|
|